Search:

Thanks mate, sounds easy In that corner there's a small removable trim piece. maybe we could get to it from there? just went and had a look. you can easily get to it just take out the jack and it's...

Ah! Thanks Mudski, i knew there would be a trick to it. I'll have a go on the weekend. Thanks again. If i can't get it right i'll probably just use a whip aeriel like everone else.

Thanks MB. Nice mod's. But you're right ,not much help. I like the door handle. Reminds me of Mr. Bean and the lock on his Mini. Lucky i'm an A.M. talkback and F.M modulated sort of guy.

recently i bought a new radio mast. After fitting it, it refuses to go anywhere near fully down. So i took the motor assembly out ,found a bit of the old plastic thing in there, so took it out put it...

Ok, just had a look. I undid the screw but it would not move. So i tried to pull up the pad that you rest your elbow on, it came off. then the plastic moulding that houses the switch lifted out...

ok, so today i removed the shims from all swivle bearings. There was one shim at each bearing, now there are none. Went for a test drive and found that the wobble was completely gone. Normally it...

I always drain mine after it's been driven for a while, so it's nice and hot. Then i let it drain over night to get as much of it out as i can, refilling in the morning.

Q What do you call a pig that knows karate?
A. A pork chop.

Rusty nail, i thought i posted that thread twice. My bad, oop's:thumbup:

Happy new year to all on the forum. Lets hope ''17'' is a good one.:driving2:

Today i converted my hubs to manual/lock hubs. As stated on the forum they were easy to do and it all went well. But instead of using the wheel brace to move from free to lock i found an old ...

This weekend i have put new front wheel bearings on my Patrol. I read on the forum somewhere that if you put the bearing cones in the freezer they will almost drop in. The outer one did almost that,...

ok thanks fellas. i bought one from the wreckers , fitted it , now all good no more noise .

Hey, is it just me, or does anyone else feel a bit woosy when they toot there factory fitted Patrol horn?? Might have to invest in a more manly one i think?

I am a relatively new member of the forum, at first i was drawn to it by the free download of the manual. But after reading the conditions ie; min. 25 posts i thought bummer, but after thinking about...