Search:

As for clearance as you may know when a wheel on a trailer moves up it usually moves up n slightly rearwards so depending on the load put on that wheel there are a lot of variables. My ol rule of...

Yeah I run Tekonsha P3 but I also did put it through a 30amp relay so as to avoid any battery flattening problems etc so its only on when the ignition is on & as it saves your settings you don't need...

Thanx guys n yeah I hope the prado makes it too as I ain't towing it I'd rather leave it there for parts for other toy drivers...
As for pics n stuff
Try searching : 2012 Postie Bike or something...

Awsome job waz so are you now taking orders for people round your area as you could get at least cost plus coupla hundred on top

Just an idea to give you some more moola$$$$ to upgrade other bits...

Great cheap n easy alternative to those thousand dollar plus models.
good job n yeah like the others I'd be putting the battery lower down just to keep heavy weights lower center of gravity n stuff ...

Well today started at 6am
first picked up tilt tray went to first job n picked up a Hyundai Escavator n took it to its destination
next picked up a franner nut harvester n took it to next farm...

Yeah me in Australia so yeah on the left side of engine as you look at it from the front of car.

Yeah near the thermostat housing or on the 2.8td along the head near firewall drivers side below injectors & Glow plugs.

As I want to mount this connection outside the cab I thought how the heck am I gunna get a cheap cover for this , Ok well I thought for a while then took my ARB Air Hose connector for a walk through...

I run mine down drivers side over the gutter then squeezes in beside the side window rubber then goes inside through the side vent . Inside it goes straight down to an extra switch via a relay & is...

I was under mine the other day to look at same thing n yes they are bolted but the heights I didn't measure.

Na wrong snorkel n don't just use the 4.2 precleaner as your main air filter not good for 2.8
keep it in the shed as later you may want to upgrade to 4.2 td as most people do...

Hey bob if its a GQ it is like a syfon feed system the only pump is the primer pump on the fuel filter housing.
The later GU electric injection model sory I'm not sure if they have a pump in the...

I had slightly different thing with my 2.8 round town never noticed anything no different levels in overflow no drips or bubbles but on a long trip out on the hyway n towing after bout 300k's it'd...

don't know if it is comon but mine looks like sealant around clutch housing to engine surface & got a cover over clutch rod area so can't say ever had this problem but yeah a mate done what 97_gq_lwb...