Search:

It is for all GUs, one just have to cut a slot in the aircon/heater assembly housing where filters go. Easy done as it has a rise in it so can be traced with sharp knife aka box cutters.



The...

Each to their own, but I can tell you from my own experience and that of another Dtronic Safari chip user that stock ECU mapping with Dtronic is no match/no contest for Harvey's ECU re-map. And...

Well as long as it wasn't ZD30, that would pump the oil out of the sump empty in 1/2 hour and then seize......those engines are breathing like peeved off dragons on a good day....

As long as it...

I'd go for full HR license aka "crashbox". In any case you will have mandatory "log book" training anyway so instructor will pass you as you progress through. To only do sychro or auto box is in...

As long as you start by hand and then only drive them in sequentially until they touch/light torque you'll be fine. Steelies are more forgiving than alloys.

Regards.

Get "Blue" professional Bosch series tools especially this kit as it has everything you will ever need either at home or in the bush.

2 piece 18v brushless 6 ah combo kit

The 1/4 impact driver...

To be more accurate, you do not own the land anyway, you just rent it for limited time aka 99 years... What you are buying is the right to use it as a place where you can build a dwelling, or in case...

While I partially agree, there is a point to make: just to be first somewhere doesn't mean it either. What was made by the nature should and shall not be claimed by anyone in terms of ownership. I...

The links in the original post no longer work, update bellow:

With Steering wheel mounted OEM switch option:

Cruise-Control-Kit-Plug-n-Play-for-Nissan-Patrol-GU-3-0L-TD-ZD30-2004-2007

With...

http://www.nissanpatrol.com.au/forums/showthread.php?38480-DIY-Aftermarket-cruise-control-installation

Just pry the auto clutch part out ==> see the image
72909
one on the left removed, one on the right still in.

Really easy job, lock the hub manually first, use M10 Allen key to remove six...

And yes, there was an issue accessing the site in past days...

Regards

OK, I've just checked mine and it still works on a few forums I've linked to however I'm suspicious that's due to other option. (mirror remote images on forum as well) I also suspect that me being...

https://ecpt.com.au/products-services/ecu-remapping/

or on Facewaste

eastcoastperformancetuning

they're in NSW.

I'm not sure what the cost is but my guess around a grand. What is...

Argh, the ultimate fallacy, indeed EDC control is the easiest and most effective tuning. There seem to be a missunderstanding, mechanically governed diesels will never achieve the output which can be...