To all those that are interested , Issue # 10 of Action & Adventure Magazine arrived today and the boy's week-end trip is definately in there , this is the cover to look out for ( Page 52 )...
To all those that are interested , Issue # 10 of Action & Adventure Magazine arrived today and the boy's week-end trip is definately in there , this is the cover to look out for ( Page 52 )...
They haven't been there for a couple of years now , I think that's block has storage units on it now , I'm about 5 minutes away at Wynnum West
I didn't take any step by step photo's , but this website from the bloke who makes then is pretty good and it was a easy fit
http://www.nissangupatrol.com/chassis-differences.html
I can't stand farking low life scumbags who think it is their god given right to steal someone elses gear , hopefully you guys get your gear back and these lowlives get what's coming too them
Agree , or BCF , I got the carpet for mine at bunnings
Yeah Timmo , I originally only had the hinges screwed to the door trim but it moved too much so then i screwed the hinges to the door using small self tappers
12 mm ply mate
Here some pics of my rear door table ( sorry for the crapy pics as they are taken on my phone camera ):
http://i142.photobucket.com/albums/r87/bigmanwaz/camerapics18-06-12016.jpg
...
I used 12 mm structual ply on my drawers that I made up but that's only because i had 2 sheets sitting here at home so I can't see why you can't as I've seen drawers systems made out of MDF sheets
I had a chance to finish off the side wings and ends today :
http://i142.photobucket.com/albums/r87/bigmanwaz/camerapics18-06-12009.jpg...
Thanks guys , Brendan all up they cost me about $200 as I had most of the bits already ,
Wild98 , the bearings I used are Nachi 6200-2NSE 30mmX9mmX10mm(inside diameter) and 25x25 box tube
Cheers...
I got a bit bored during my days off so after researching all the DIY drawer threads and looking at the price of new sets i decided to knock up my own seeing as how i had most of the bits and peices...
I just read through your build-up mate , top effort so far , count me in for a wheel , i'd love to hear and see your GQ in the flesh ( so to speak )
Mate - " it's easier to seek forgiveness than it is to get permission " is what I live buy with regards to " SWMBO "
Yeah Rick , Mine had a slight loss of power when i fitted my 285's , when i put the 3" exhaust on it helped , I still need to get mine tuned to suit the exhaust , my speedo is out aswell but i just...