Search:

Think its more like 10 days per year for a full time worker. The Trojan worker you mentioned is a good call, but it sounds like you are being a bit selective, extra mile for the best team workers....

And restamp the engine number on the new head while its sitting on your work bench! Not in the car when you want to get a roady later on..

As you are putting it all back together, there is a short 50mm or so by maybe 16mm id? coolant hose between the front of the block and the metal pipes that service the heater hoses on the passengers...

Bloody hell… your sons name would not happen to be Steve Austin the bionic man? 110 kph??? Average victorian hell riders cant reach 60 kph 🤪

Totally agree with you. I dont mind going for a ride on a MTB. I try to stay on bike tracks and if I am in traffic I keep right out of the way of cars. Not like these lycra clad monkeypox infected...

E-scooters. A menace on our roads and footpaths. Clueless people hire them and dump them wherever they please. Found this one in a local state forest recently… 😂😂😂85674

Vegan farking cyclists 😂

Wow Cremulator, that came up looking good. Peebee, this stuff is originally a ute bedliner. It is fairly tough. It covers all sorts of sins. It can chip if hit hard enough, but its easily repaired by...

Mate, that looks exactly like my drawer 😀

All you need now is some serious power and some BREMBO stickers.. sorry😂😂😂

When the Labor govt gets back in with the help of the greens I am sure SBS and the ABC will get their more than fair share of taxpayer funding. Enjoy your 4x4 trips in whatever is left open by the...

Mate is that an arbor press in the background? Is it any good and do you use it much?

Mate.. I have shitloads of Left hand taps and dies, all in common metric format like M8 x1.25 etc… looking at the nut on the drill press its gotta be at least an inch in diameter with 14 to 16 tpi...

CCI quiets are good too…🐭

It would need to be a farking incredibly good bolt store to pull a nut like that off the shelf…no chance at all .. or get an old school fitter who can use a lathe to make one. Or green loctite the...