http://i825.photobucket.com/albums/zz171/teno45/20130726_160633_zpsf08b9fdb.jpg
New springs fitted today by ARB townsville. Sensational guys there. Good service and done me a good deal. Old man emu...
http://i825.photobucket.com/albums/zz171/teno45/20130726_160633_zpsf08b9fdb.jpg
New springs fitted today by ARB townsville. Sensational guys there. Good service and done me a good deal. Old man emu...
Email sent mate. From an 08 CRD Wagon. For everyone else's reference:
http://i825.photobucket.com/albums/zz171/teno45/th_20130604_192548_zpsa0778a51.jpg
Darn... beaten to it!
If Im understanding this right, I think where you have tapped into is a Yellow Black wire at the alternator? Probably not the best place to go, Looking at the diagrams in my book this is the...
Check out the date stamp for the post third from the top...
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/68.jpg
Sent from my GT-I9300 using Tapatalk 2
www.customrockers.com.au
From my trip away last weekend, my mate in his cruiser was constantly switching his locker on and off. I got everywhere he did, with a standard lsd. I don't know if I'd bother with a rear locker,...
Im back and we found it! Not a bad drive in, couple of interesting sections but nothing overly challenging. A quick walk off the track, across surveyors creek and up to the monument. Good campsite...
I usually just wrap a rag or papertowel or similar around it and squeeze. Repeat til papertowel has minimal oil on it. Seems to work for me.
Being that the filter is a paper/woven cloth matt type...
Just finished checking it all out / actually modding it to how I want it.
seems all the LH door switches are wired together, then join all the RH door switches that are wired together. then go up...
Thought of this myself. Just haven't got around to doing it yet. Should be just a matter of cutting the wire from the light that goes to the doors, assuming it would go forward to the center light...
Depends on the lights you're using and the run of wire to power them if you need a relay.
I don't think you've wired the switch correctly either.
2 should be connected to the coil of the...
No!
From my very limited experience, a mate who installed his. Dont trim it! The gauges are calibrated to the set length/resistance of the harness. the probe produces millivolts. any small change...
http://i825.photobucket.com/albums/zz171/teno45/23012012777.jpg
http://i825.photobucket.com/albums/zz171/teno45/050720121285.jpg
More from john...
"Heres my truck, note bigger scoop, has internal vanes to direct the air to front of intercooler. Plenty of light bars , Cheers John"
Couple more photos from John
http://i825.photobucket.com/albums/zz171/teno45/14072011221.jpg
http://i825.photobucket.com/albums/zz171/teno45/270620121254.jpg
...