Search:

Forgot to upload the prototype 1 of the build. Will be attempting another with a different approach.


https://www.youtube.com/watch?v=HhOR4YSG6NY

https://www.youtube.com/watch?v=TW_Xx_abJcY

Quick update, had to make custom brackets to suit the location. Pictures below.

7764077641

Finally got the Air Con Unit in the spot needed, had to shorten the cable to it though and drill a hole for the wire to pass through so it didn't restrict the movement.
pulled apart a usb car...

Got the mounting points sorted this afternoon!
Bracing was used to make mounting points.

Here’s where it’s at so far...
77166

Was able to get a little more done on the weekend after needing to redo the bottom bit as measurements were off... :/
Mounted the Air con unit where I need it to go.

Now just to glue it in place...

All good... Bluetooth to the single din head deck to amp / speakers.

Tried test fit on weekend and need to modify a couple of things.

Will update as I go.

Thanks mate, a lot of hours in this little project!
I’m sure we could come to an arrangement if he wanted to ��

Created the mould by covering ipad in alfoil layering it in painters tape then smearing mould release over the top. Waited a couple of hours and released the ipad from the mould.

Test fitted on...

Hi All,

Over the last two weeks I have been experimenting with putting an IPad into my mates GQ.

I have made it so you will be able to dock the iPad and charge when in car as well as being able...