Search:

Again what 04OFF said is right .

With 250kg + on the ball you wont be able to have much in the vehicle , if you want to be legal and the AirBags wont cut it on there own .

The suspension...

I think David Dash had the 180kg upgrade done to his Patrol , the engineer had to do lane change and braking tests on a airfield somewhere near Adelaide , probably cost more than the On Track gvm...

Yeah when I was lifting it out , I thought this bloody thing is heavy , reckon the other one might come close to double .
I think for any long trips I will probably remove both .

I removed the single seat from the second row , it weighed 24.3 Kg .

I grabbed a set of Rhino Racks at the AutoBarn 15% off sale .

76239

Pulled the grill just to have a look and checkout access to the winch only took a few minutes 76072

Yep I did say full tank and 2 of us onboard, wife and I dressed are 170 give or take a kg and yeah both 62's had tow bars that's it nothing else , they are heavy suckers , any weight you add to the...

Yep nando that sounds good , I have weighed 2 new std Ti's now both were the same weight with the wife and I onboard, 3000kg .
All weights I have posted are actual Weighbridge numbers , that's on...

760577605876059

I hear ya nando but that's the problem with all that stuff you would be well and truely over 3.5T
I don't know anyone that's been pinged or had a insurance claim rejected YET for being over but I...

Thanks CJ for that info , it must be a PITA the issues you are having with the Bar .
What are your actual measurements from centre of hub to guard ,
I'm going to run my 62 over the bridge again...

Nando , I measured the front before and after centre of hub/wheel to guard
Before Right side 530mm after 525mm
Left - 525mm after 523mm
Bugger all difference and that surprises me , I actually...

Yeah CJ , I'm pretty happy with the way the fit out is going Mark at Fourby Fitouts does a nice job ,
He raised the false floor 15mm you can see it in the photo , by doing that I can fit a 105a/h...

Fourby Fitouts has installed a False Floor and Cargo Barrier , Fridge Slide and Drawer to come
Had the Rhino Bar and Runva Winch fitted , I chose the Rhino Bar I thought it looked good but what was...

Picked the new Ti up today , I drove it straight to the weighbridge , 2 of us and a full tank of juice
Front axel = 1540 , rear = 1460 for a total smack on 3000kg , no surprise its heavy that...