6th January 2014, 08:55 PM
when i brought mine it came with a rubber do dad that the pushes in the you push the radio into it thats what the instructions said and its been in their for 2 years
8th September 2013, 10:40 PM
yer sounds like a plan i have the holesaws to fit a safari snorkle to a gu that im willing to share their only bunnings ones but do the job well
6th February 2013, 08:59 PM
im not sure exactly what the problem is with why the guage isn't working but the control module for the fuel transfer needs them to work otherwise it can't safely transfer the fuel the the light...
14th January 2013, 09:52 PM
I could probably repair yours if you wanted me to but you would have to send it to me if you wanted a spare of have to much trouble with getting a new one thanks
16th April 2012, 09:06 PM
hi
what we use as work is a short piece of copper pipe bent to 90 degrees with the end almost closed attached to the hose we remove the fan speed resister that bo that goes into the side with a...
22nd December 2011, 08:08 PM
its worth noteing here that some times where the main bearing in the compressor goes as it gets hot it damages the seal in the front of the compressor makeing it leak so if it has you will need a new...
15th December 2011, 09:33 PM
I think i might be able to help you i made a wiper delay ciruit for my old ute whitch is variable i think with some modification we could effectivly make a set delay after ignition is turned off i...
12th October 2011, 08:59 PM
Hi check if iot does with your foot on the brakes could be a earth issue
10th October 2011, 08:03 PM
Hi redarc makes a range of them from 3 to 60 amps i would reccomend not going under 20amps http://redarc.com.au/products-and-services/ce-series-charge-equaliser is the link i do not work for them i...
9th October 2011, 05:13 PM
Hi
New here but have some input Yendor is correct what happnes is when you draw off of the 12v battery it requires more to recharge and because they are charged in a 24v bank the 24v battery gets...
