Search:

Here is D!ck on hillclimb 3...this is about as far is it got unfortunately..
http://i65.photobucket.com/albums/h207/et4wd/LovedaycompShipposbday090rs.jpg

Took us a while to get him down and here...

I was pretty impressed with me GU doin this amount of Kays loaded up...considering how much it is wound up!
http://i65.photobucket.com/albums/h207/et4wd/LovedaycompShipposbday024rs.jpg

The...

OK here ya go peeps have quite a few so strap yaself in!

My race truck loaded and ready to go to Riverland Challenge,
http://i65.photobucket.com/albums/h207/et4wd/LovedaycompShipposbday001rs.jpg...

Only let down with a auto locker is they are hard to unlock on surfaces with low drag.
Makes changing direction very hard and can cause some probs if the front wont unlock.....ask the boys that used...

Im with canuck!
Go to Jaycar andask for some Unick, it is a heat transfer compond they use on mother boards and other bits on computers.
It is a white paste type stuff just pump a bit of it in the...

Its a big heavy job that cant really be rushed as it would be real dangerous if the gearbox fell!!
i usually takes me a half a day to get mine out on my own, but i have done it more than 2 dozen...

Looks like the sag on a typically driven GU.
They all seem to do that after a while on the drivers side, especially if it was only ever driven around with one person in it.
Nothin major that a set...

Is that a 30A fuse in the Powertech?
Im sure it is if its green! thats what my fans use on my LS-1 so im used to lookin at them!!
Where it says V ADJ.....maybe it cooked the inside of it cause the...

I agree with big_fletch!
I would junk the lot of it and start again, easy for me to say as im good with electrical but i take my time to get it right.
I would rewire all the 12V accesories to the...

OK , im pretty sure they didnt work in reverse as they are on a 'rachet' style thing??...well mine didnt, so i junked them and went to manuals!
As for yours NewDan, if they have 'Auto' and 'Lock' on...

Here ya go growler, this is before it really came up high!
One of the entrys to the 'Woddy campsite right next to the ruin,
http://i65.photobucket.com/albums/h207/et4wd/loveday2010014RS.jpg
...

I know there will be a code on the rim somewhere stamped into it , it will be something like 15 X 8 JJ or J on a after market rim.
I dunno what the JJ or J mean but a quick ring to ya local tyre...

Howdy all,
i have some pics to share with ya from the mud run we did yesterday ( sun) Oct 2nd.
Everyone piked out so it was just me and a mate in my race car, was good fun and there is some real...

Gunna jack ya thread for a couple of pics Hendo,

Here's ours in action at Outback Challenge in 06
Made from 2 star droppers with bits of 4mm thick angle welded in 5 spots, it uses the gears off a...

Here ya go bloke,
I made this adapter with a bit of bent 3 inch pipe that i welded to a 3mm plate then chopped the under side out and die ground it back at a mates place. It is mounted to the base...