Search:

G'day and welcome to the forum mate. Enjoy your stay!

G'day and welcome to the forum mate. Enjoy your stay!

I don't think it really matters if you do it hot or cold mate, others may have differeing opinions. The other thing that can release an airlock is a bleed screw. Not too sure which motor you have, I...

I received my package when I got home yesterday arvo! I have to say I am very impressed with the goodies! Thanks Andy! I've got the vest on as we speak!

Oh, and Doggy, if you want a look at the...

G'day and welcome to the forum mate. Enjoy your stay!

G'day and welcome to the forum mate. Enjoy your stay!

You're a deadset legend Andy. Thanks a bunch mate. And good luck to you and the family for tomorrow mate. I'm sure plenty of people on the forum will be sending good vibes your way and thinking of...

That's the weep hole in the water pump which is there to let you know when the pump has seen better days as far as I know. Hopefully someone else will be along with some more info.

Nice, congrats mate!

x2..go the mighty Q!

Although, I had to rebuild my blown up 2.8...But she's still going!

After the headache I had mate, and the symptoms you are describing, I'd almost bet my lefty that it's the same problem. Regardless, hope you can sort it out without too much drama. If you have any...

Hey mate, sounds like the exact same problem I had for a while, I checked everything that has been mentioned above and still no joy. After swag loads of trial and error I ended up having to pull the...

G'day Phil, welcome to the forum mate. Enjoy your stay!

Considering that it is only vapour coming from the rocker casing at the top of the motor (that's where the PCV is located) I can't see why it would smell burnt unless the oil was really dirty and...

There are a couple of ARB stores over here, one in Canning Vale, and one in Osbourne Park.(Ithink) The other option would be Makin Tracks in Midland, they are an OME stockist and ARB distributor. I'm...