No mate my French is actually very bad but I had some help from the wife. I actually have been to France quite a few times now and likely to go more in the future so be careful I might hold you to...
No mate my French is actually very bad but I had some help from the wife. I actually have been to France quite a few times now and likely to go more in the future so be careful I might hold you to...
Damn there is a few raafies here, soon to be ex army in a couple of months, done 15 years. A couple of trips to Afghanistan and one to east timor. Had a gutful now, time to go. By the way I still...
Check panhard rod bushes mate this is probably the most common problem. In my case I rebuilt the hubs, New bearings including king pins, New radius arm bushes and new panhard bushes. Costly but each...
Xtreme 4x4 sport. He is also a member on here. www.xtreme4x4sport.com.au
Sent from my HTC Sensation Z710a using Tapatalk 2
So got some more pics of progress, here is the new GU box beside the old unit, significantly larger and heavier than the old one. Notice the pitman arm in the GU box drops down a lot lower than in...
Well I got the shits with rebuilding the power steering box idea and bought myself a GU box off a member from here. I just finished cleaning it up and bolted it on, significant difference in size and...
Mate I had the same problem, same stud too, I used an easy out in the end with a lot of heat aswell. A right angle drill if you can get one is great to get in there. Also it probably goes without...
I live local to you mate so will keep an eye out for sure. Bastards.
Yep thats why I'm restoring my old girl, I know she will never really drop in value with the demand they have now. There really is nothing out there that is as good for what I want it for. Every new...
Yeah I will use a bit of sheet aluminum or steel which will slot underneath the dashboard at the front and some tabs will stick out the back and screw into the existing screws in the vents just...
Final product looks better in the flesh, the pic was taken at night and the flash picks up every little mark. Notice my next project in the background on top of the dash.
...
Time to put it back together with some of this stuff.
http://i1191.photobucket.com/albums/z466/jonb80/Maverick%20Build%20Photos/IMG_5079.jpg?t=1341392007
...
Not on hand mate but it looks like any other gq with normal buckets and standard centre console. Just picked it up from the wreckers and bolted it all in. No modifications required.
Sent from my...
yep easy as, I did it to my bench seated maverick. You'll need an extra bracket off the passenger seat so make sure you grab that from the donor vehicle. Centre console will just bolt in the existing...
Looks good mate, for the sliding part of it can I suggest strips of nylon instead of the strips of ply you have there. You can lubricate the nylon with beeswax or something similar and would slide a...