5th January 2014, 02:01 AM
I haven't been on here for quite a while. Been pretty bloody crook. All that being said as the health improves some other gremlins attack our happy lives.
I have had an intermittent problem with...
3rd November 2011, 01:37 AM
Sorry for starting a new thread. I know I discussed I would give details on the one I was purchasing but could not find the thread. Early hours of the morning, that’s my excuse and I’m stuck with it....
2nd October 2011, 03:28 PM
As a rule, most engines should have 140 to 160 lbs. of cranking compression with no more than 10% difference between any of the cylinders.
Low compression in one cylinder usually indicates a bad...
28th September 2011, 11:31 PM
I am uncertain what the government is thinking. In other countries (such as most of Europe) the population is vastly different than it is here in Australia. The areas of bushland and open country...
23rd September 2011, 12:17 AM
After you have taken the rust back to metal make sure you treat the metal with and anti rust agent. You can use an acid based product such as Deoxadine or a organic based converter which would be my...
22nd September 2011, 03:38 AM
Welcome you'll find yourself at home here. Great site, informative forums and no shortage of sensable help.
Enjoy
20th September 2011, 10:08 PM
I feel so sorry for the family. Such a simple to do with such dire results. I have already educated my sons in regard to these types of dangers. It scares me how unaware they can be. I personally saw...
20th September 2011, 08:48 PM
The more I look through the threads the more I realise what a great site this is.
Thanks guys.