Search:

The 2.8s use a gearbox out of a 350z. (Smaller box). The 3ltrs are the same box as 4.2s but have a dual mass flywheel instead. Also slightly different diff ratio, but nothing a set of 33s or 35s...

What scotty said. For most brake controllers, wiring it up is easy. 1 wire to ground, 1 wire down to trailer plug, 1 wire off the brake peddle (use a test light to see which one is the switched wire....

I've had autometer gauges in mine and installed quite a few of these autron gauges in other vehicles... At first, I was thinking of swapping to autron and freeing up a spot for a dual batt gauge they...

Hey Mate,

I have ordered an ASE cooler for mine too. Should be here this week so I'll let you know how she goes when its in.

Cheers

Cant believe I missed this thread... Love takin storm pics, but can't seem to find anything that Ive takin that stands out from the crowd.

The big lighting bolt was looking out from our balcony in...

Just a little report / feedback for those who have a dual mass flywheel that needs attention, and don't know whether to convert it to single, or go with another expensive dual mass. Here is what I...

I have installed a few sets of these into customers vehicles. Haven't had any come back yet. I have also wired for a few customers another dimmer alongside the factory dimmer to dim in more at...

Luxo has pretty much nail it in his response....


Also, I think u may open a can of worms here. This has been done to death and you will get the "4.2 all the way" fanboys start ranting about how...

As I said above... Take it to an exhaust shop and explain that you just want the thermocupler installed post turbo.

They are the experts at welding exhausts.

The Supercrap ones are around 350gsm. I saw another post of AB's where he's using 650 GSM commercial vinyl. Nearly double the markets stuff

Yeah I agree with patch here. For what its worth, I just got an exhaust shop to weld and plug the probe. I did the rest. Cost me no more then $50. ZD's have an annoying heat shield that can be a pain...

Happy birthday dude. Hope you had a good one. Cheers :cheers:

Patch, Fletchy

That was along the lines of what I was thinking… If it does go on the way down, we are in a lot of sh……………t. Just wanted to hear a few nasty stories… No idea why? Should of asked...

Hi fellas,

I have an issue with my dual mass flywheel. What I wanted to know is if anyone else has had any horror stories to share of their flywheel.

At the moment there is a lot of play in...

I thought the once off fee was a bit hard on the people that run this forum... Don't cut yourselves short. Seriously, people must understand it's an ongoing commitment to run servers, peoples time,...