Search:

I had to put the window down enough to unbolt the glass then wind the regulator right down, then you put the glass all the way down (between the reg and the outer door skin) so it sits in the base of...

If you have a bit of wear in the front prop shaft splines then it will tend to rumble alot, so there is potential damage after a period of time. It's best to unlock the hubs to avoid this.
Also if...

Now for the bending. The plastic needs to be heated in order to be bent. Acrylic will shatter if you try to bend it cold. Polycarbonate can be bent cold but it's best to heat it as it will give you a...

Here's a small project I made the other day that I'll share for anyone else who wants to make one. I needed a gauge holder for my boost & pyro gauges, but I didn't want a dash or pillar pod, so I...

Looks like a caster wedge. Are you sure they are plastic? Caster wedges are made from steel.