Search:

Ideally the sway bars should sit flat to work perfectly in all situations

I've got the ko2s,very happy with them.
Had them for 1.5 years,can barely notice any ware on them yet.
Good in the wet and decent off road too

No worries at all mate.
If you Need any more pics just ask

Agreed mate.
I think in early series 1's up to end of 91 only the St and ti's were colour coded and after then I think only dx were grey

G'day again mate.on mine the lower silver/beige comes up higher than yours but I think this answers your question.
This is a factory paint job

Looks like part of oil cap to me,i had a bit break off too,looks just like that.

Sounds like it has to be a vacuum leak somewhere.
So they're good for 1st 2 or 3 pumps ???
Leak in vacuum tank maybe?
You could disconnect at alternator or vacuum pump(depending on model),seal it...

Handbrake adjustment is on the back of your gearbox as thats the handbrake.
The other pic you have is the brake bias valve....don't fiddle with it

So sorry to hear that mate.
It's a hard slug with the way things are in the "new world".
Going back 5 weeks i was on my first cruise with the wife...we were on vayager,returned 18th march.it...

That's an old,abandoned rule.
It's a pdf file you can download it any time

Good bit of info there.
So many different variations in them.
Cheers mate

I second yeti on the carpet cleaner from woolies,get the upholstery attachment too.
Works a treat and so easy

As it was fine before you had it all apart,could be a vacume leak from a hose not being connected

Yeah,true.the choices are limited in 32s.
Good compromise on size though

G'day mate.i put the system you're looking at on mine a couple years ago.
I got the matching extractors too.
To be honest,i didnt like it.
Gave a bit better top end,but thats all.
It had a horid...