24th November 2016, 08:09 PM
Melbourne Moto Expo starts tomorrow...:smiley_thumbs_up:
23rd November 2016, 12:14 PM
This might be of interest...They will get it sorted pretty quick I'd say.
25th October 2016, 03:47 PM
I can recommend the courses run by Amateur Radio Victoria if you can make it to Melbourne. Laid back and easy going guys. The have some practice exams on their site that give you an idea what to...
22nd September 2016, 07:00 PM
Expensive and engine may run a bit hotter.
You can drain it and reuse it indefinitely, does not build pressure so your hoses last a lot longer.
My biggest issue with it was the flush - getting...
7th September 2016, 12:50 PM
You are probably right, but he should come out and say it rather than this condescending article that assumes anyone who lifts the bonnet of their 4WD is a moron and has no right to do it.
7th September 2016, 09:52 AM
I actually agree with you there. No disrespect to macca, but I do think the author is a bit sensationalist in the article in regards to some of his comments.
"We checked with a development...
6th September 2016, 11:26 PM
Some media blasting businesses use walnut shell fragments to blast so as not to damage the base metal (usually aluminum) of the part to be cleaned/blasted. Dont know about the calibrated bit though...
2nd September 2016, 03:14 PM
You should of read some of his dribble back in his Two Wheels days...he has mellowed heaps.
30th August 2016, 09:21 AM
If you know someone with an ultrasonic cleaner they can be useful too.
26th August 2016, 10:22 PM
For the guys who want a knife sharpener...You can buy a Lansky.
https://www.youtube.com/watch?v=TWSHDFrPhpU
19th August 2016, 06:50 PM
Melb. 4x4 show. Lots of cool stuff to look at!
30th April 2016, 10:28 AM
Japanese Gardens just off the campus of the University of Southern Queensland, Toowoomba. Great place to chill.
66554
28th April 2016, 10:52 PM
I could imagine...
For others following if your interested in what wire wrap is...
I knew they used the procedure on the Shuttle but found out later it went all the way back to the Apollo and...
28th April 2016, 07:12 PM
If you want to know, PM me your address and I'll send you my clamp meter.