Search:

Well myself the missus and my daughter are away on a bit of a touring/camping holiday and we just did the bundy coast to 1770....... That's for another story.... 2 thumbs down! Any way we headed from...

Lanolin Liquid Protectant

http://www.erps.com.au/lanolin-products.html

spray it in and it will creep in every nook and cranny to protect it. I do it about every 3 years. Just water blast...

There is a temp sensor in the pan area screwed to the valve body this seems to be 90% of issues with autos not going in to OD you can drop the pan and replace the temp sensor or you can use a couple...

Ill come, I'm good at some things but my forte is not listed...... ill have a go at auto sparky work, after all how hard could it be.... red wire joins black wire and there you have it.......smoke...

Nah it was a little later than that in a blookd big hole... Bloody cheap Chinese CV's. Fixed it that night and was ready for wheeling that night but there's a 9pm curfew on driving..... Apparently
...

Nah it was a little later than that in a blookd big hole... Bloody cheap Chinese CV's. Fixed it that night and was ready for wheeling that night but there's a 9pm curfew on driving..... Apparently
...

http://www.findmespot.net.au/

Just over on a Hunting forum and they were runing a group buy on PLB's. I text a mate to see if he was intersted and he put me on to this. Sounds like a bit of "must...

what kind of k's are on ya truck???? might want to change the o2 sensor (bosch part number 0 258 986 501) there a single wire sensor and should be changed every 80,000kms

well its 1 way of doing it :jawdrop:

http://www.youtube.com/watch?v=sN6PjivhMEI&feature=player_embedded

Mate I've got the same problem only mine goes away after it heats up a bit. I am leaning toward the auto temp sensor. You can trick the auto trans computer by soldering a resistor on line to make the...