Search:

Are you on LPG? If so, 20 degrees is not uncommon. 230k isn’t much on these engines either.
I’ve just put rings through an engine that had done 400K - and it didn’t need a bore. I gave it a hone...

Welcome Bronk!


Sent from my iPad using Tapatalk

Anything is possible, but I would have thought that the rubber hangers for the exhaust would have compensated for a slight twist. Perhaps the exhaust was unbolted when/if the engine mount was...

Correct. The only way to adjust the pre-load is by putting in different thickness shims. So, to do this correctly, you'll likely need several different sizes on hand before you start. Patrolapart has...

Cheers MudRunner, I'm a member of few forums - easy to miss the intro on the occasional one. I'll duck over now.

Thanks for the advice - any preferred (ie. Cheapest) sellers? I'm in Melbourne.
...

Thanks, but those links don't work unless you're part of the "Out and about 4x4" group on Facebook. So if you can't see them, join this group then try the links.

Sent from my HTC_PN071 using...