Search:

Lost City is high on the to do list. Thanks for the pics and the inspiration! Nice looking wagon you got there.

I reckon so, but you may want to consider an additional bracket to support the extra weight. I was really hanging off the screws and as you can see, they're so tight that the bottom of the hose clamp...

I put an order in with Patrolapart last week and had it the next day! Very happy with the service and it saved me over $120 on the same part from the local Nissan dealer :D Will shop again.

I'm happy to report that I used the Patrol in anger (ie 4wd and off road) for the first time last weekend. Got away for some camping with the family and managed to try out the new Oztent RV5 and to...

Here's the solution a mate at work came up with - stainless steel cable clamps! :D Worked a treat and was able to have the awning sitting just over the doors, which also provides some weather...

PRO!

Nice work mate.

Sent from my SM-G900I using Tapatalk

Big weekend of Patrol work. Gota say that i'm feeling pretty stoked that I managed to accomplish these jobs - especially when several of them were considerably out of my comfort zone.

The Gauges ...

Had the 2.75" Beaudesert exhaust fitted yesterday. Stoked! It's the first of the major engine mods that are planned. I got the high flow cat with mine and it certainly sounds throaty. The installers,...

Entry 2

Autumn in the Mountains

Taken in 2008 somewhere in the Barrington Tops region.

http://www.nissanpatrol.com.au/forums/images/imported/2015/06/64.jpg

Entry 1

Tenacity

Taken at the Stockton Sand Dunes in 2006

http://www.nissanpatrol.com.au/forums/images/imported/2015/06/63.jpg

Seems like slow progress, but I took my time today and kept on chipping away.

Today's mission was to wire into the 2A fuse holder onto an ignition power line and tidy up the power loom. Would have...

Thanks mate. :) I've only trial fitted the gauges into the pod. One was a tight interference fit and needed some manipulation to get in (but it stayed there when fitted), the other was loose and...

Thanks heaps mate :D It's not without the pucker factor i assure you lol.

Always admire people who can do that kind of work. Thanks for sharing, it looks great!

Gauge install continues this afternoon. Slowly but surely!

Today's mission - splice in the dimmer switch wires and mount the programmable push button screws to the pilllar pod.

4 bolts and a...