Search:

I think all Waeco fridges have a low voltage cutoff setting. This basically turns the fridge off when it senses that voltage. Just set the low voltage cutoff at the highest setting and then you...

I have found the 300kg springs too hard when there is no weight in the back, but if he is doing a lot of touring with a lot of weight in the back then they will be fine.

I have a set of Dobinsons...

I've got the Redarc Tow Pro Elite, I ended up going for it because it has lots of installation options, you can mount the actual unit anywhere, anyway up and the cable that comes with it to link the...

They also make a conventional fridge with a sliding drawer underneath it:
http://www.evakool.com/evakool-dc70drw-fridge

I have a set in my GU and a mate has a set in his GQ. They are really good value for money but:
* They weigh 85kgs which is seriously heavy
* The drawers only slide out about 80% of the way, they...

It's a sensor for the climate control, I think it measures infrared light levels

I've been looking at these lights for a while, and I couldn't find a lot of info about them. I eventually bought a set of these for my GU and thought I would post a quick review.

The lights...

The problem is not with normal batteries, it's with AGM batteries, they are a lot more sensitive to heat

Have you got a link for these? The only ones I can find at that price are halogen, the LEDs were $250 each

Yep, standard 7 pin flat socket, it is worth it for the LEDs that let you check that it is wired correctly without even connecting a trailer. On top of that it will make troubleshooting easier too

Regardless of outside temperature, the thermostat should not open until the engine is up to temperature. Exactly the same thing happened to my TB45, the first thing I noticed was that on long...

Cool, thanks for the reply

Anybody???

No, it is a chamber to reduce resonance in the inlet system, they are on the vast majority of cars and are there to keep them quiet. You could remove it an the worst that would happen was that you...

I highly recommend you borrow (or buy) a rattle gun for the backs and a ratchet spanner for the front. You can do it without them, but it does make it much quicker and easier.

I presume you...