Search:

I'm pretty sure this is in the lithgow township itself in an area called Oaky park, right near the water treatment plant.

X2 with what yendor's thoughts are. I thought mine had gone bang not too long ago, but it was only the belt pulley had failed.

If you have a valve inside the cab i would have thought it would be the needle valve rather than the dawes.

I'd try winding in your needle valve a little bit until your boost is 10-12psi at 100

I haven't long had the car. The previous owner said he blanked it.

I'm not game to start pulling things apart with going away tomorrow, but I will pull the pipe off when I get back.

Thanks...

Hi Simon, welcome to the forum mate

Hi there frosty, welcome to the forum

Thanks stropp, by the looks of the weather forecast I may get to test the muddies out :)

Hi all,

I've recently purchased an 02 3L Patrol, which had full nads installed at the time of a reco engine being installed.

I've been following this forum since I decided to start looking...