Search:

That is a good method, well done.
Here is another, very simplistic way. A funnel and some clean (new) garden hose.
As most oil bottles have measurement marks on them you can get very close, before...

After lining up with above mentioned referenced point, I am using a tie-down strap and my 12 volt pump to reseat the bead, just to make sure I can do the same in the bush. It seated far easier than I...

Starting the removal with 'trusty big lever' and then hold with foot while proceeding with another lever.

4656

Here I'm cutting the plug off as close as possible.

4657

Place the patch...

The next shot shows the bead breaker attachment for the jack. Some folks will use the whole foot of the jack, with varying success. I believe crushing the whole tyre profile down would have to damage...

It had been a long time since I had done a tyre repair, apart from a couple of plugs, so after checking a slow leak and finding a puncture, thought I would do a plug and patch, and to familiarize...