8th October 2020, 07:33 PM
Yep you're correct. I looked at that site a few times and assumed they were just another parts store but the 'jay' brands are their house brands.
I'll give them a go
7th October 2020, 07:46 PM
From that angle it looks like late 1990s Mitsubishi challenger with a later years headlights.
6th October 2020, 12:40 AM
4th October 2020, 09:47 PM
Came across this on another site:
http://www.nissanpatrol.com.au/forums/images/imported/2020/10/35.jpg
4th October 2020, 07:41 PM
Firstly, if you do throw the ctek out let me know when your bin day is and I'll come get it. ;-)
Secondly; I looked into this a while ago for a similar exercise. I had a large panel and wanted to...
3rd October 2020, 09:57 AM
Sorry to hear. My family are in NL and DE. It's a very stressful time for them (and for everyone).
3rd October 2020, 09:54 AM
I was looking at a Jaco Finch? (6x4 trailer sized camper with solid top and canvas) and thought it would be interesting to build storage on the back of a Ute then sit one ontop. An extremely budget...
28th March 2017, 12:02 PM
FYI - if you have a GQ and the hexagonal nut and lock washers that need bending; you can purchase the nuts and washer as seen here as kit from patrolapart, eBay etc.
I highly recommend it!
...
22nd March 2017, 09:22 PM
:-) No it was replaced sometime ago. I already had a new one when I pulled the old one off.Just updating the thread for anyone who may come across it.
With that said, I now have a clutch issue,...
2nd January 2017, 12:37 PM
Thanks guys! I'm certain the water pump is leaking so I'll pick one up today.
I did the coke bottle trick when i replaced all the hoses etc however on the way back from Clare, when it sprung the...
26th April 2016, 10:53 AM
And then report back here ;-)
12th April 2016, 08:11 PM
Googled prices for GQ lwb sliding window frames :-( :-(
10th April 2016, 09:04 AM
Hyundai Excel. Who would of thought?
Definitely the round model from about '94 onward. Mine's off a '96 but compared with a few and all were the same.
I tried all the Nissans first with...
23rd January 2015, 11:08 PM
Mattress, bed and slats all in the back. Actually the slats fit perfectly height and length to fill gap behind rear seats for an even floor. Nothing ever works out that well for me ;-$ good day.