Search:

What year model Evil Twin? As you could imagine if the turbo is still pushing pressure into the intake manifold not a lot of EGR is going to get in there, it's going to take the path of least...

I blocked my EGR without Dawes and needle valve. No can do as I found. When EGR opens the ECU winds back the boost to allow the EGR to flow in, which now it can't as it is blocked, your EGTs now...

We had them out here in the Central West a couple of years ago checking trailers. It was just a highway patrol vehicle pulling up randomly. There where a lot of over weight tradies trailers got done....

Done.

Lemo

Not familiar with the vdo gauge, but I wouldn't as it may be calibrated to that length. Curl it up and hide it somewhere would be my advice.

Lemo.

That looks tidy, job well done and yet another way to install the Provent without adaptors.

Lemo.

Thanks Rickie3, had searched online but had no luck. Was one of the reasons it wasn't done yet as was waiting to get instore, running out of excuses now.

Lemo.

Here are some pics of my ARB rack that I said I would put up. Shows the cross bars and spacing, and the feet system.
http://i570.photobucket.com/albums/ss143/danil14c/Forum/IMAG0954_zpspe70ubsn.jpg...

I do walk down the midlle of it, you could maybe bounce in the middle without feet loosing touch, but don't think I would jump. Just went and had a look and it has 10 cross bars plus if you count the...

I purchased the full length alloy rack in December for $1511 and fitted it with help from a mate in their car park. Was quoted $100 fitting, but could only get over on a Saturday when they don't do...

Oh, also happy with the quicker spool up since blocking the EGR, much more pleasant around town to drive and I thought I was happy with it before.

Hey hodge,
I put the EGR block in and fitted my Dawes yesterday, wasn't going to put a needle valve in. I to now have similar problems at 100 as yourself. Boost will settle at 12 flat road no...

Hey Hodge, you won't regret the Autron, I love ours. You will need the quick-fit as well, or like I have done put a brass barb in the IC pipe. If you haven't already got a spot for the egt probe,...

Don't you wish they stayed that clean all the time. I like the smoked bonnet protectors, think they look great.

Great stuff, I had the trim off my door on Sunday to adjust the hinge and snapped a shot of the same plug for you. The switch appears to be in the latch. Can,t see that disconnecting it would be a...