10th August 2013, 05:31 PM
Reviewed by moderators, AB to include mother in law to sweeten the deal.
10th August 2013, 04:35 PM
Boost on Patrol ZD30 is computer controlled and under certain conditions the computer will reduce boost to allow the EGR to work, this has the effect of reducing power and sooting up your engine...
10th August 2013, 01:25 PM
What size hose to fit the PCV filter?
9th August 2013, 10:11 PM
We'll let you off with a warning if you post a pic of the Prado being recovered by a Patrol.
9th August 2013, 09:32 PM
I don't know why your wiring has been bodgied up like that but have a very close look at the condition of your fuse box as per the photos in this thread;...
9th August 2013, 04:25 PM
It's the rear leaf sprung utes that have the narrower rear track, same as leaf sprung Landcruiser ute has narrower rear track. I believe they are made that way as there is a limit to how far the...
9th August 2013, 12:19 PM
I'd be looking at TF ('97 - '03) Rodeo, they're in your price range in 4WD dual cab diesel configuration, very reliable, and being factory turbo will perform much better than the N/A Navaras.
8th August 2013, 10:10 PM
Great Wall..............to keep the rabbits out!
8th August 2013, 07:22 PM
They are a proper locker vacuum operated as Winnie suggested, made by Macnamara I believe.
5th August 2013, 08:25 PM
The gearbox behind the RB30 is a very strong box, I believe the gearset is very similar if not the same as R32 GTR. I've seen many threads written by people who have fitted RB25/30 turbo engines in...
4th August 2013, 09:28 PM
I'm a big fan of Aussie made Kings springs, I've put them in 3 of my Nissan 4X4's and currently have a set in my work van which have done over 200,000km.
4th August 2013, 09:18 PM
While I dont know what the actual fuel consumption figures are, keep in mind the 4.8 has a much more advanced twin cam 24 valve cylinder head and I think also variable cam timing, so should be more...
2nd August 2013, 09:57 PM
1st August 2013, 11:45 AM
I use a steel pin punch and hammer to get them out, the bearings are hardend steel so you won't hurt them. Just keep alternating where you tap on the bearing so it comes out evenly, same fitting the...
1st August 2013, 11:30 AM
Please be considerate of other drivers and aim your headlights down after fitting HID. I do a lot of night driving and I'm tired of being blinded by inconsiderate pricks who have illegally fitted...