Search:

a few quick snaps of the rear quarters cut off and the plates being tacked on

65407 65408 65410

65411 65413 65412

a few little dents sanded. then i beat them out as best i could and...

if it's a GQ then it's more likely cracked than not. i phoned andrew at Big-O 4x4. it was about $110 delivered i think from memory

so as i mentioned progress has slowed down alot. but hasn't completely stopped

these photo's show where the front clip had separated from the cab below the windscreen

65207 65208

welded...

so this turned up with a courier yesterday :)

it's 12sq meters of butyl rubber (doing the firewall, roof, floor and doors), 8sq meters of dense foam underlay, (firewall and floor under carpet),...

so time to bolt the cab down firm, new bolts of course and nice big washers. the rear two had done what they all do and split the nuts out of their captive housings and the factory hole isn't big...

time to make some longer rear upper arms now that I can see how much clearance i have around the body so I cut the old mount off....

63133 63134 63135

had a bit of a measure and cut up the...

sorry peter, at this stage i'm going to wait until i finish the build before i start selling bits and pieces, never know what will be needed down the track

nah she won't stay reliable, i'll give some life to the old diesel, down the track a bit, when it's finished this car will be here for a good time, not a long time :)

thanks mate, it keeps me occupied :)
yeah i'm on the hunt for a GU front and steering box to match, this one came up for a few hundred bucks, couldn't say no

62218 62219

neither of these are mine, just one's ive found on the net while looking for idea's. thought maybe you guys can take some inspiration from them as well if you want to get that...

hey guy's just wonder if anyone has trouble posting a thread i the parts and accessories category? everytime i try to click start new thread it pops up an error with something to do with PANJO, what...

Here is a couple of quick snaps of the one's we made to convert an RB30 to a TD42 without having to cut or weld to the chassis

Passenger side and Drivers side

62164 62165

Finally stopped procrastinating over repairing the coil tower today

jacked up the chassis and took off the front right wheel and took the spring out, this shows just how rusted out it was...
...

I believe, and correct me if i'm wrong, mirror balance is where they match the harmonic ballancer and the flywheel together on the engine as a rotating assembly and a neutral/zero balance is when...

so after making a set of engine mounts for a mate, i wasn't quite happy with the first set i made for this so i made another set

62135 62136 62137
62138 62139

they turned out pretty good...