Hi All,
So this has played on my mind for a while and after doing some digging I can't really find any answers. Like most CRD owners I have blocked my EGR between the cooler and the valve on the...
CRD EGR Blank - Piping build up after lots of kms?
Hi All,
So this has played on my mind for a while and after doing some digging I can't really find any answers. Like most CRD owners I have blocked my EGR between the cooler and the valve on the...
Wish I had of seen this a couple of weeks ago, paid $160 for two from a wreckers and they are just as bad as my originals!!
Sand, mud and the misses down in Bremer Bay!
Bogged up at Wedge in WA
Would totally be a goer if I didn't have to look after to dog but I suppose that's the whole point really isn't it.
Yeah could be, it was replaced not to long ago. Have flicked the pics off to my mechanic to see what he says, might have to take it back to them and get them to sort it I suppose.
I really wanted to put a set of Toyo AT2's on my Trol when I changed over to steel rims but Toyo ran a huge promo on them and I was waiting for ages so settled with Coopers ST-Maxx. Have always ran...
Big ass breaker bar is what I used on mine with a bit of brute force and ignorance!
New fire place I installed earlier this year.
http://i251.photobucket.com/albums/gg289/Beni_C/20140511_120232.jpg
Arrived in the mail yesterday so hooked him up to my battery box last night and have it running the Engel behind the bar atm. Works a treat! Will change the cycle on to 4 deg instead of 5 deg I...
Thanks TD, dead keen to crank this mod out!!
Can your AT's survive this kind of treatment?
I run Coopers myself but dont plan on doing this with them!
Clever idea from the advertising boffins at BFG though!
...
End result.
The mechanic at Robson basically said not to waste my money on them checking the big end as they haven’t heard of one failing yet and they had a surprising number of GU's in there so I...
The 3 first things I did to 08 CRD when I bought it, Scanguage, Provent 200 Catch Can and EGR block. It chucks the check engine light up every now and then but the CRD seems to control boost better...
So dropped into Robsons last night to discuss with the boys what was going to happen next. Craig the service manager said that the idler pully was knackered which I was already aware of and advised...