Search:

Just had a look at the Fatz. Probably adding another $500 to the ever increasing cost. I will have to leave enough for the divorce settlement if she reads this.

Just don't rush it. I fold it in half and lie down it for a minute or so then start rolling it up. Doesn't take too long. Rolls up the same every time. The roll up size was really important for us....

Yep, cut them level and the bar went on without too much trouble after that. Thanks for the help.

7144971450

Ah, the voice of reason. I will see if I can bend out and then check the welds and see if any visible cracks. If ok I will get some kill rust over the top to make sure it doesn't get more cancer in...

I bought one of these mppt controllers. I think it was $23 of fleabay. I just need to get a panel now and hook it up and see how it goes. For $23 if it is shit it isn't the end of the world. Fingers...

Ended up ordering the ARB bar from the local shop that have a 15% off at the moment. Got it for $1130. Millweld wanted $280 freight which put it over $1500, Patrol Docta $1250 but no fittings...

Not much chance of taking out the back seat with a 4 & ar old. I have a 65lt Waeco so it is still quite high even if at the floor level. Would love a drop down but can't afford a second mortgage to...

Hi mate, not in Adelaide but I swapped original dual mass to single solid flywheel. Heaps cheaper and I couldn't feel any difference. Bought heavy duty clutch off eBay, can't remember brand but was...

Thank so for the offer Kalen, I have a bullbar and winch going on in the next few weeks so will wait till then.
Cheers
Scotty

Pulled the brakes out again. Callipers are all good. Boot is slightly split on the inside. I don't think you can buy the rubber boot(insert) by itself so may have to get a kit and I will buy a new...

Hard to work with wires under the dash. Easier to pull the radio out and find power from there.

I bought the ARB twin and bought a case from Bunnings for $50 and bolted it in. 6895668957

68769
Keyless entry showed up today. But I think the wifey wants to put it away for the kids to give me for fathers day.

68762
New wiring for the lights at the back. Will have both brake lights again. Thanks Mark.

More important than what oil is changing it frequently. Oil and filter every 5000k's is pretty much when most people will change. I used Penrite in the GU but am now using Delo in the Mav.