Search:

Had this problem with a David Brown, when they did the pump they put the stop control on back to front, Pull out to run, push in to stop
That will most probably be the trouble

Have you had a good look at the cranky little barstard, not enough there for two flies.

Be very wary of some dealers on Ebay etc selling stuff for 4 wheel drives. The following need a wide berth, RV4x4, anything with the name Ozrover, interproductsonline, importerdeals00.
These names...

It's Morey's and 1 drop every 8 secs is best. it's a lead replacement system for older engines and is used to help keep the valve seats in reasonable condition.

just presuming that it is a TD42, on the right hand side where the oil filters screw onto, that alloy housing hides the oil cooler. undo the bolts etc , remove the cover and you will find a miniature...

.

If you are talking about boosted engines the pressure will be even in all directions so it doesn't really come into it. The standard manifold will work quite well up to 18-20 lbs. Beyond this...

Just get a non-genuine sender from Repco. The thread is 1/8 BPT, 10mm will fit at a pinch.Some have two connections some only one but they all work the same

DO NOT BUY ANYTHING FROM THIS MOB.
Over 200 complaints to ACCC about him.Has been fined etc but totally ignores this

You'll have to drive round without the bonnet so everybody can go ooh! looky dat thing

Righto, it appears to be the winch I have , the only difference is the Dyneema and fairlead. I do not want to rain on anybody's party but if it is the same as mine , which it appears to be, then a...