Search:

G'day Yendor, was hoping you would have some insight on this.

The wiring harnesses have no relays mounted in them. I believe the flex relays are internal of the viper alarm module, there is one in...

I bought a Swivel hub kit and a a GU nut kit while I was at it. Will let everyone know how I go. Cheers for pointing me in the right direction MR.

I think 6000k is even too high personally, I wouldn't go above 5000k for headlights, I see it as a good in between of light output and glare reduction. Perhaps 6000k for driving lights because they...

I wouldn't go anything above 5000k. It pisses other drivers off and you start losing practical light output in my opinion. I work in the LED lighting business and the most common colour we use for a...

You're really not having much luck with this pertronix from start to finish are ya Lucas.

Did you fit the ignitor to your distributor In situ or did you pull it out? Maybe your vacuum advance...

You still need a light bar for the 2 seconds it takes for your HIDs to warm up though surely, better safe than sorry you know.

Makita 18V because it's at a good price point and it's a quality unit, any warranty claims are dealt with within Australia, don't buy from Burnings they have old stock at inflated prices, Milwaukee...

Went last year and have to say it was a VERY interesting experience. Some blokes built a two story pub in there camp site, absolutely amazing and they had foxtel with the grand final on (not to...

Patch he means he gripped the shaft of the dissy in the chunk of his drill while the whole thing was out and then just pulled the trigger and filed it down, kinda like a low rpm makeshift lathe.
...

Silver I think you adjust the dwell by spacing the ignitor closer or further away from the magnet sleeve, I left mine stock as I haven't upgraded my leads or replaced plugs yet

Gday mate and welcome, no need to be sorry, there are meet and greets in fact there is the national meet up coming up where you'll be able to meet people and learn safe practice techniques off many...

Sounds like it but it really isn't, if you have the tools to grind it down the whole job should take an hour including the wiring

Upload a photo of the Box, Parts you have and the instructions. I got the Ignitor 2 and Flamethrower 2 which is a Hall Effect setup and I had my Fitter and Turner mate turn the shaft down for me,...

Interesting mix of music on here, I'm much the same, my roots are in Aussie Rock such as Chisel, ACDC, The Angels, Hunters and Collectors, Rose Tattoo etc growing up listening to dads music, then I...

Haha, only if my boss wants to pay me more first!!