Search:

G’day blokes and lady’s, so I’ve had my first inspection for engineering of my gq patrol today, and while I was in the engineer mentioned to me that some gqs came with factory split rims, and the...

need some ideas please blokes.

i’ve got a random occasional power cut in my gq, which only ever happens in 3rd above 2k revs. it’s very short, longest it’s lasted is a couple seconds. definitely...

hey bud, that little upside down cup is just an empty sleeve that attempts to create an air pocket if you were to be that deep in water. the top of it isn’t tightly sealed at all, i covered it in...

G’day legends, so the age old dabble of having mods on our daily’s interfering with insurance. yes, i know the first thought is to get rid of them, or get engineering, but that’s not what i’m asking....

will do mate, it’s got the plastic splash cover back over it that goes around the filler neck after i took these photos. cheers!

that would be the one mate, is that a gu? gq one is a bit bigger and black, i binned mine & replaced it with a little ryco Z14 fuel filter. $10.90 from supercheap and i’ll be it’ll do a better job...

hey mate! nah that’s the little breather ‘cup’, it’s supposed to create a pocket of air to avoid water entering the tank if it was to be submerged, but it isn’t very affective. the one way valve is a...

TD42 fuel tank breathers! my gq had a strange sorta drop/cut in the revs only ever in 3rd above 2200rpm. one hard line was completely filled with wasp mud, and the one way valve was cactus. binned...

gday blokes! not sure if anyone is still following but i just through i’d let everyone know that it was my stub axle. had an almost 3mm lip worn into it half the way around. replaced with a smooth...

cheers for that info mate! i pulled it all down yesterday and there definitely was too much grease in there, only been a day and haven’t driven more than 55-60klms but no leaks yet. i took a really...

update on this, apologies it took so long, wasn’t really on my phone over christmas/new year! so i’ve removed the kingpin bolts and every single one was bone dry. it doesn’t smell/feel at all like...

will do mate! i did accidentally leave my hubs in a while ago for a few weeks of highway driving lol

it was already leaking grease beforehand but i assumed that would’ve ruined the seal, so i...

it’s definitely grease, doesn’t have that distinct rank smell of gear oil. it never did it before i replaced the seal which is why i’m pretty sure i e put too much grease in the wheel bearing...

cheers for the reply mate, i didn’t pack the air void in the cv no, just leading to believe i’ve packed too much into the wheel bearing assembly.

i was following the manual, which stated to pack...

afternoon everybody, new to the forum here. ✌��

just chasing my tail over this grease dribble i’ve got on the driver side coming from between the stub axle and dust cover. i have replaced the seal...