23rd April 2018, 02:46 AM
I had an Icom IC 400 pro in the dash where you have your Uniden until I put in navigator and then chucked it in a roof console, they are excellent radios except for the cheap handset. The menu on it...
19th February 2016, 07:55 PM
Well, I welded some steel plates to the front holes for the radius arms today, but my clunk is still there, albeit not as loud and not as noticeable through the floor pan Bang Head. . . . . looks...
14th February 2016, 08:37 AM
I've got mine velcroed just above the demisting vent on the dash under the pillar gauges, it's easy to read there and out of the way. I ran the cable under the pillar cover then on the inside of the...
5th February 2016, 08:24 PM
Just loosened the nuts and checked the holes. . . . and what do you know, I have elongated holes, about 1mm on each side! My next question now is, how do I fix them? I was thinking of getting some...
19th December 2015, 03:44 PM
Second for Robsons, great bunch of guys and good at what they do even if it does cost a little more.
11th September 2015, 03:40 AM
it's because of the older 40 channel sets running wide band and the new 80 channels sets running narrow band. . . . you can hear the older ones on new sets if you turn your volume right up if that...
31st August 2012, 03:23 AM
Order done, payment sent. . . . .
Andrew
5th August 2012, 05:55 AM
Hahahahaha sounds like where I used to live, good old Gippsland! Miss the Crooked River and Wonnangatta. . . . . . . . might go back for a visit one of these days.