83433
I really should be spending this money on my ute but the temptation was too great. :wink::wink:
83433
I really should be spending this money on my ute but the temptation was too great. :wink::wink:
G'day Bluedog77 I have been running the MT51's 305/70R16 they are not too noisy and handle ok but i'm no weekend racer either. I did a central Australia trip Brisbane, Camron Cnr, Gammon Ranges,...
The Stedi head lights are awesome on low beam and high beam and two Stedi 22" St4K light bars are very good as well i just nip up all the allen key bolts on them and never had any moisture in them...
That's the bolt spacing on the bottom of the radius arm for the sway bar mount the 'H' bracket bolts to their radius arm then the sway bar mount bolts to the 'H' bracket.
I've got a bit of a soft spot for Stanage.
80160
The Breakaways near Coober Pedy I was fairly happy with how it turned out.
79533
2. Boggy Water Hole Fink Gorge.
79488
Boggy Water Hole Finke Gorge.
79487
Have a read of this might be helpful.
https://www.patrol4x4.com/threads/gq-rd28-variable-geometry-vnt-turbo-upgrade-and-front-mount-intercooler.406027/
Janowen Hills
77465
Fraser Island
77464
Gave what i could best of luck AB great mob here to get you going again.
You could try this mob on eBay. http://stores.ebay.com.au/air-on-board/LED-Laser-Etched-Series-/_i.html?_fsub=599636019&_sid=292736109&_trksid=p4634.c0.m322
Added a lift pump and filter goes better now the injector pump doesn't runout of fuel any more.
6889368894
I have a set of 285/75 16 MT's on my ute with no balance issues noise is good, rated to 1700 kg they seem a to have a little more flex in the side wall when cornering hard. They've worn about 2mm in...