Hi all as usual I have a problem ...
The heater core is blocked solid ....
Now do you have to de gas the aircondition system ?
Its a big job but, it just about un useable in the frosty weather
Hi all as usual I have a problem ...
The heater core is blocked solid ....
Now do you have to de gas the aircondition system ?
Its a big job but, it just about un useable in the frosty weather
No no beads in the tires. Just tried to get them balanced .
Just could not get it right . all looks good in the suspension and steering bits .
so put in some beads and it is just great .
...
well changed the pads old ones still had 50% left ..
Then the master cylinder By passed . new master cylinder . ! oh poo !!!
A few answers ..
About 1/4 spray can cap full /Tire
The tires were balanced three times at Three different places . There was three different results . all crap ! all took money off me .....
I...
Hi all last week the 80 KPH shake grrr
well had the wheels re balanced. mstill rbbish
50mm lift all looks as it should under the car .
adjusted wheel bearings lost the clpi !! fitted spare...
Hi all what's peoples thaughts on Genuine Disc brake pads . the original ones need to be replaced soon 250,000 kms .
well i got the brown water ! There might be some improvement. Maybee ....
I want to try and see what sort of flow comes out of the engine side .
it looks like another adventure coming up !! i...
that truck does look good .
Man you have done a lot of work on that house ... looks great .
I wish work would not get in front of my projects .
hope you are still enjoying your Patrol
well that looks better .. put up some Before pictures .. A lot of work those house things !!!
mmm will just throw in what I know ...
I do machine work for a local Injection shop . The set up specifications for the pump dont seam to be right . to much advance !
After my pump was done up...
well here is the update .. pulled the head off . machined the head fitted new valves and hardened seats radiator replaced with a brass copper one . water pump , all back together and working fine .....
where does the engine breather come into the inlet system ?
does it have excessive crankcase pressure. I think it might be breathing a bit heavy its running on the fumes . disconnect the breather...
I think you will find it is the set up inside the injection pup .
have seen a few here that are rowdy on cold start .when its cold . to far advanced ... mostly with the 12mm Mod .
Dave At cooma...
I have done his machine work for about the last 20 years ..