It's actually diamond 'like' carbon.
Not sure, but I think Bosch has DLC coating already, but Baileys' injectors are coating the entire solenoid/needle coated compare to Bosch's coating only at the...
It's actually diamond 'like' carbon.
Not sure, but I think Bosch has DLC coating already, but Baileys' injectors are coating the entire solenoid/needle coated compare to Bosch's coating only at the...
I ended up with Koni and Kings.
Couldn't be happier, Although heard good things about IronMan went with something tried and tested for a long time.
Sent from my iPhone using Tapatalk
It would be easier to check the air filter. If the soot is coming from intake side of turbo under pressure the inside of air filter would be full of soot.
Sent from my iPhone using Tapatalk
Sorry for the multiple replies mate, if it is inlet side of the turbo, remember it is under suction rather than pressure, so no soot can actually be thrown out, but if it is on the outlet side of the...
67567
picture for the above post
........................
......................
.......................
answer to a flow rate question, note CRD pump is actually CP1H rather than CP3
...........................
........................
.............................
I'll post all of my posts:
It's about a five pages long thread and about 20 odd posts from me highlighting all the technical evidences of the advantages of the 2 micron filters.
I'll see what I can do to post all my posts...
Hello guys,
I am running a 2 micron Racor filter (R445) before the OEM filter (CRD).
I have done an extensive evaluation of the advantages of having a second filter and the importance of 2...