bushes

[dirtaddict]

Any one know if its possible to buy trailing arm ,sway bar, radius arm panhard, bushes in rubber i need to replace the lot and want to use aftermarket , a lot of these item,s from nissan come with the actual bar as a kit and all the aftermarket jobies are urerethane which i rekon ride harsh after a short time , rubber seems to take the jarring out of the square edged hits that give high shock shaft speed, Like corugations and stray cats (just kidin) far better than urethane or nolathane or whatever it is they call the stuff .
thanks

[GeeCee]

You can bu the rubber bushes from Nissan, some dealers don't know this though (supposedly).
Not sure if Nizzbits is on this forum, but http://www.nizzbits.com.au/

[Bigrig]

You can bu the rubber bushes from Nissan, some dealers don't know this though (supposedly).
Not sure if Nizzbits is on this forum, but http://www.nizzbits.com.au/

X2

Try Patrolapart in Melbourne also.

[growler2058]

As above mate go the nissan bush

[Robo]

all available gen nissan and aftermarket.

[shorty_td42]

hey guys, having recently replaced the front panhard bushes (rubber) i found there are a couple of well priced sets on ebay, also replaced whole rear end with poly and is definatly a little more rigid but poly definatly will last longer. anywho all rubber kits are available on ebay

[werafa]

did the radius arm rubbers myself with cheap nolathane bushes from cheapasup. they don't last as long, but were easy enough to get into once I had done them and knew what to do

[skinnybob]

Hi guys
I replaced my GQ the first time with poly they didn't last so I replaced them with rubber ones from Repco.