OzzieNorm
23rd February 2012, 03:30 PM
Hi Folks.
I would like to remove my front aftermarket winch-capable bumper/bull bar - to clean it up and repaint.
I've been under the front of the 2006 ST Patrol and had a look. I see 4x 19mm bolts securing the centre section to the front chassis rails. OK. Undo the nuts.
I also see numerous 'plugs' set into the top of the bar that seem to receive screws (which seem to come from behind the grille (which I have not removed). [Maybe to support body panels...?]
Does anyone have a generic diagram of 'how to' install such a bumper ['cause removal could simply be the reverse :big grin:].
Any other tips or advice appreciated.
Thanks.
I would like to remove my front aftermarket winch-capable bumper/bull bar - to clean it up and repaint.
I've been under the front of the 2006 ST Patrol and had a look. I see 4x 19mm bolts securing the centre section to the front chassis rails. OK. Undo the nuts.
I also see numerous 'plugs' set into the top of the bar that seem to receive screws (which seem to come from behind the grille (which I have not removed). [Maybe to support body panels...?]
Does anyone have a generic diagram of 'how to' install such a bumper ['cause removal could simply be the reverse :big grin:].
Any other tips or advice appreciated.
Thanks.