Nissheads GU8

[Maxhead]

After a bit of waiting she's finally here :) Picked her up on Friday

...Warning some nude vehicle pics here...LOL


She's just a bog standard without any options at all, so now the fun part begins. Dressing her up.

This week we'll have:

Steel bar
12000lb winch
front pro locker
side sliders
side protection bar
dual battery
55W HID XRay Vision lights
Suspension upgrade and 2"lift
HR tow pack.
7" GPS Entertainment unit
Bully Dog Gauges
and few other small bits

Will update with some decent pics soon

[Sir Roofy]

Wow nice and clean mate sweet as
congrats on the new rig

[gowalkabout.com.au]

Looking nice and shiny. what suspenion set up are you putting on?
also did you ask the dealer about a tow pack i was led to beleive from the dealership we are getting ours through that nissan was throwing them in if you just asked.

[DX grunt]

Nice one Kris. Congrats.

Rossco

[AB]

Congrats mate, well done!

So clean, so tidy...lol

[growler2058]

Noice.....

[Timbo]

OOoohh Shiny

[Mazodude]

very nice. well done nisspat

[taslucas]

Now lets see some nude photos getting a bit dirty!

[the ferret]

She's a plum Mate, good onya.
Cheers, the ferret.

[twisty]

Congrats Kris ... colour me jealous

[wildgu6]

Very nice indeed Kris, Congrats mate thats gunna be one nice rig. Well done

[teno45]

Glad to see you didn't miss out! Happy to help you upgrade!

Sent from my GT-I9100T using Tapatalk

[Woof]

Yeah Yeah it is nice and pretty....................now get out and get it dirty..lol
Seriously Kris, very nice mate, well done I can't wait to see it after the mods

[Russell1974]

Nice rig can't wait for the first lot of getting down and dirty pics

[Maxhead]

Yeah, I cant wait to get her out and about but unfortunately that wont be till a couple of weeks but I might have to chuck a sickie and hit the Brindies...LOLOL

Couple of small mods arrived which will be going in shortly

[MudRunnerTD]

Dribble, dribble, dribble, I REALLY like the Arctic White. ALOT! Very nice ride there. Go the mods! bring them on. Use it well.

[mudduck]

Looks good mate, cant wait to see the mods

[Finly Owner]

Bloody White! Nice new rig Kris.


Tim

[Maxhead]

Got some goodies fitted today.



Steel Bar + 12000lb winch + 55W HID XRays
1286312865

Side steps and side rails. 2" lift ...looks a bit high but It should settle a bit...The tyres look small...lol
1286912867

Dual battery setup
]1286812870

Under-body guard
12864

Some freebies thrown in...Compressor and large recovery pack
12866


Starting to look a bit better...lol

Next on the books is snorkel, front locker and tow pack and hopefully rear bar

[wildgu6]

Top stuff mate, looking great Kris. Just move them tyres on fella. Love the bar and underbody. Nice work

[belzi82]

Very nice Kris - wanna swap??? hahaha

[Rip'n'Shred]

Congrats mate. Looks good already. Can't wait to get mine!

[Maxhead]

Congrats mate. Looks good already. Can't wait to get mine!

When's it due mate, you won't be disappointed

[Sir Roofy]

What cracker mate only trouble is you cant go where we go at present

[Maxhead]

What cracker mate only trouble is you cant go where we go at present

Haha, don't worry mate she'll get into a lot of places. Not too worried about getting some dings or scratches mate...lol its only a car after-all

[Sir Roofy]

haha, don't worry mate she'll get into a lot of places. Not too worried about getting some dings or scratches mate...lol its only a car after-all

glad to hear at least they wont stand out like on mine
pin stipes that is

[Dark 1]

Well done mate, now the fun begins setting up a new truck & it's a troll ..... You lucky bugga.


Tapatalking my way around.

[gowalkabout.com.au]

Looking good. can i ask what TJM hit you up for all that? could you pm me if you dont want to put up here.
Ours should be arriving at the docks in melbourne this monday and hopefully in tas by the end of the week. just went and bought a full length rack for it the other day from ARB. I got the prices for the rest of the stuff from ARB but would be keen to know how they compare.

[Rip'n'Shred]

When's it due mate, you won't be disappointed

Prob not till may, long storey.

Going last of the gu 7. Not too sure about the vdc and I like the rear lsd. Not to mention the price, could not say no. seen second hand ones similar price.

[Maxhead]

Few small things went in this morning.

GME TX3540
BullyDog Watchdog

Draw/bed back in

[belzi82]

Looking very nice Kris

[Maxhead]

Looking good. can i ask what TJM hit you up for all that? could you pm me if you dont want to put up here.
Ours should be arriving at the docks in melbourne this monday and hopefully in tas by the end of the week. just went and bought a full length rack for it the other day from ARB. I got the prices for the rest of the stuff from ARB but would be keen to know how they compare.

Mate, didn't get much change from 10g's. Hopefully get most of that back come tax time :)

[taslucas]

Top stuff mate, all those goodies look great. Now i have to wipe the drool off my keyboard!!!

[Woof]

Very nice Kris...............................NO GET OUT THERE AND GET IT DIRTY MATE....LOLOL

[Clunk]

Very nice Kris...............................NO GET OUT THERE AND GET IT DIRTY MATE....LOLOL

Jeez kris, you wasted no time getting the new rig kitted up mate......... looks the dogs mate, very nice indeed

[GUtsy ute]

Very nicely set up Kris, lots of fun and enjoyment ahead!
Nothing like starting from scratch and building it exactly how you want it.

[Maxhead]

Yep, she's ganna be the way I want it , no cutting corners this time.
Still running her in boys and girls.. No 4wd just yet but won't be long...lol..no towing yet either

[Maxhead]

Few more bits added. 7" entertainment unit. installed OziExplorer ...woohooo
Stuck everything in place so the cabin is now finished except the compressor and front locker switches to come.:)

13090
13091
13092

And a shot of the rear diff locker (factory)
13093

[Woof]

One hell of a toy you have there Kris, looks fantastic mate

[Oversize]

Lookin' goooooodddd! Now I know what Thelma looked like once-upon-a-time. So does it have a name yet and whens the christening???

[Maxhead]

Lookin' goooooodddd! Now I know what Thelma looked like once-upon-a-time. So does it have a name yet and whens the christening???


Cheer mate, no name but my boys have come up with a couple
White Raider..lol after the Canberra Raiders
or Great White . I'm not much into names but something might stick one-day....hahaha

The christening is coming, just been away for work too much lately and still trying to run it in

[Maxhead]

Well, just filled up after 220 km and put 25 litres of diesel into it. This works out to be around 11.3l/100km which is great news(all town driving) :) . As CRD's can be very thirsty, I think I might have got a good one.
This should hopefully get better as she runs in. Driving to Sydney today so should have a better idea on highway k's usage

[Bigrig]

Well, just filled up after 220 km and put 25 litres of diesel into it. This works out to be around 11.3l/100km which is great news(all town driving) :) . As CRD's can be very thirsty, I think I might have got a good one.
This should hopefully get better as she runs in. Driving to Sydney today so should have a better idea on highway k's usage

Another diesel show off!!! lmao

Good figures mate - travel safe to Steak and Kidney!!

[Rip'n'Shred]

Shes looking real nice mate. What else do you have planned? Keep the pics coming.

[Maxhead]

Shes looking real nice mate. What else do you have planned? Keep the pics coming.

Still to go are front pro locker, safari snorkel, tow pack, tint and possibly rear bar with twin wheel carriers which is interchangeable to 1 wheel and 2 jerry cans.

Then I,ll strengthen me shock towers just before my trip. There's propably couple other smLl things but that should do. My bloody wallet feels pretty light ATM..LOLOL
Also just ordered a set of 35W hids for the front fog lights...lolol.

Oh yeah, then when i get back some ugly 33's...lol

[BenB]

Nice pics. It looks like the polar white? I am interested to know the manuf date, mine is 11/11 and described as a ZD30-5F MAN 08 MY. Do you know what differentiates between a GU7 and GU8?

[scotty83]

What Stereo did you fit? looks pretty good.

[NissanGQ4.2]

What Stereo did you fit? looks pretty good.

It was a Chinese fleabay one Scotty, will try and find the link, he posed it somewhere.........probable in that drunken rumbling thread

Edit: Sorry Scotty you will have 2 wait for Kris for the link, I'm 2 drunk 2 find it :) Its somewhere here

[Maxhead]

What Stereo did you fit? looks pretty good.

THIS IS THE LINK TO THE STEREO I GOT OF EVALBAY


http://www.ebay.com.au/itm/New-7-HD-Dash-Double-2-DIN-Car-DVD-GPS-Sat-Nav-Player-Stereo-Head-Unit-Radio-/220849350286

[Maxhead]

Nice pics. It looks like the polar white? I am interested to know the manuf date, mine is 11/11 and described as a ZD30-5F MAN 08 MY. Do you know what differentiates between a GU7 and GU8?

Not sure on the colour except its white...lol. manufacture date was 12/11.
Only small differences like rear diff lock, stability control, chrome rings around the Speedo and tacho and no aerial at the front , its now at the rear window :)

That is about it I think

[Rip'n'Shred]

Sounds good. Which rear bar are you going. I've been liking the kaymar but the ARB looks real good colour coded. The kaymar seems more friendly to change arms on. Trying to decide myself.

[BenB]

Thanks for the detail stability control sounds good

[Maxhead]

Sounds good. Which rear bar are you going. I've been liking the kaymar but the ARB looks real good colour coded. The kaymar seems more friendly to change arms on. Trying to decide myself.

Not really sure, the wallet is a bit light on ATM. I refuse to put any ARB crap on my bus...bunch of f'ing wankers!!! OK ARB rant over...LOLOLOL

[Maxhead]

The tranny/transfer guard is in.... Crappy phone pics, sorry

[Clunk]

Have you been polishing under there kris, tis very shiny??? Lol

[Maxhead]

Have you been polishing under there kris, tis very shiny??? Lol

Yeah mate, she hasn't even hit the dirt yet...HAHAH. 1000km service on Monday then more bits coming Tuesday and then we;ll get her dirty :)

[snicko]

Wow Kris what a great Troll!! (Took me 5 years to put the goodies on mine!!) Looks magic!! What more can I say?? Hope to see it in action one day.

[Maxhead]

Thanks for the detail stability control sounds good


Haven't had it kick in yet, well not that I felt anyway. When it hits the dirt it might be a different story. There was a bit of talk about stability control and soft lift not mixing very well but so far so good. I went with HD suspension at the rear and mid-duty at the front. All seems pretty good to me

[Maxhead]

Wow Kris what a great Troll!! (Took me 5 years to put the goodies on mine!!) Looks magic!! What more can I say?? Hope to see it in action one day.

Thanks Sneaky, As they say not here for a long time but a good time...HAHAHHA. I can't wait to get out and about but just no time at the moment and I need a boat and not a 4x4 around here at the moment. lolol

[snicko]

Thanks Sneaky, As they say not here for a long time but a good time...HAHAHHA. I can't wait to get out and about but just no time at the moment and I need a boat and not a 4x4 around here at the moment. lolol

Hahahahaha A 45ft boat would look pretty awesome behind the troll!!!

[Maxhead]

Hahahahaha A 45ft boat would look pretty awesome behind the troll!!!



Hahaha, Can you tell me missus that!!!!! I've been trying to convince her is a necessity and not a luxury. My reasoning is if I can't catch fish I can't feed the family...LOL. Unfortunately she's not buying it at the moment ...Give it 6-8 months and watch this space :) or not! :(

[snicko]

Hahaha, Can you tell me missus that!!!!! I've been trying to convince her is a necessity and not a luxury. My reasoning is if I can't catch fish I can't feed the family...LOL. Unfortunately she's not buying it at the moment ...Give it 6-8 months and watch this space :) or not! :(

Hahahahaha OK if 45ft is too long then how about a 9ft one?? You can still fish off a Jetski!!

[Maxhead]

Hahahahaha OK if 45ft is too long then how about a 9ft one?? You can still fish off a Jetski!!
45ft might be a fraction to big but a 22-23 ft tinny would do me fine and I won't even complain...LOLOL Not sure the jetski would handle a 200kg marlin or tuna out past the continental shelf :)

[snicko]

45ft might be a fraction to big but a 22-23 ft tinny would do me fine and I won't even complain...LOLOL Not sure the jetski would handle a 200kg marlin or tuna out past the continental shelf :)

Hahahahahahahahhahahahahaha Maybe a 5kg fish??? hahahahahaha

Over our way we have to be careful of the ones that eat the 200kg fish!!

[Maxhead]

Hahahahahahahahhahahahahaha Maybe a 5kg fish??? hahahahahaha

Over our way we have to be careful of the ones that eat the 200kg fish!!

I want to jump in with one of those beasts...I've got a few diving tickets but to dive with one of those is my dream...drool, drool. Even a cage dive would probably do me to calm me down for a while

[snicko]

I want to jump in with one of those beasts...I've got a few diving tickets but to dive with one of those is my dream...drool, drool. Even a cage dive would probably do me to calm me down for a while

Well I expect to see you soon then!! You could finish running the troll in and come to Snickoland!!. We have world class cage diving platforms that you participate in!!
While you are keeping them busy I could take the rest of your family for a buzz around the bay on our Jetski!!

[Maxhead]

Well I expect to see you soon then!! You could finish running the troll in and come to Snickoland!!. We have world class cage diving platforms that you participate in!!
While you are keeping them busy I could take the rest of your family for a buzz around the bay on our Jetski!!


Well, now you might have us changing our trip directions. We'll be heading through SA in July on our way up then but winter is probably not the best time to be down south . In saying that I might have to hold you to that and come visit next year. Pity you guys can't make it to Loveday

[snicko]

Well, now you might have us changing our trip directions. We'll be heading through SA in July on our way up then but winter is probably not the best time to be down south . In saying that I might have to hold you to that and come visit next year. Pity you guys can't make it to Loveday

Not sure whats the best time to go swimming! Just PM me you address and I will send you some info if you want. I'm spewing about Loveday. Really wanted to go...

[growler2058]

Not sure whats the best time to go swimming! Just PM me you address and I will send you some info if you want. I'm spewing about Loveday. Really wanted to go...

Ya know we're gunna talk about ya don't ya hahahhahahahaha all good of course but reckon ur ears'll be burnin

[growler2058]

Oh and I'll have a big bottl o squash n all hahahhahahahaha

[Maxhead]

Ya know we're gunna talk about ya don't ya hahahhahahahaha all good of course but reckon ur ears'll be burnin

So, I've been told you're coming in with me Andrew...HAHAHHAHAHAHHAHAHAHHHA

[molongmick]

Ge whizz Kris, you are making me jealous, first a new van and now all of this to your new Troll.

Well done mate, a great build up.

How do you find the BullyDog?

[Maxhead]

How do you find the BullyDog?

The Bully Dog is excellent except the boost is displayed in KPA(when its on metric setting) which is a bit annoying. I've emailed them to see
if the changes can be made. Haven't heard anything back yet....fingers crossed

[VIRK]

Congratulations Mate... She'll Kick Ass once you put all those extras in... I'm sure if you get the tow pack from the dealer they would throw in a transmission cooler for free...

[Maxhead]

Congratulations Mate... She'll Kick Ass once you put all those extras in... I'm sure if you get the tow pack from the dealer they would throw in a transmission cooler for free...

Now you tell me! lololo. I didn't think of that at all, oh well you win some, you loose some..hahaha

[TimE]

THIS IS THE LINK TO THE STEREO I GOT OF EVALBAY


http://www.ebay.com.au/itm/New-7-HD-Dash-Double-2-DIN-Car-DVD-GPS-Sat-Nav-Player-Stereo-Head-Unit-Radio-/220849350286

Nice looking truck.

Can you give us a review of how this unit performs. Can you load and run Ozi CE and topo maps on the SD card?

Did you fit it yourself? If so did the ISO cable supplied fit OK, or did you need to get another "Nissan" adapted cable, if so where from and part no. would be helpful.

[Maxhead]

Nice looking truck.

Can you give us a review of how this unit performs. Can you load and run Ozi CE and topo maps on the SD card?

Did you fit it yourself? If so did the ISO cable supplied fit OK, or did you need to get another "Nissan" adapted cable, if so where from and part no. would be helpful.


Cheer Tim, Yep running OziExplorer on it now. The supplied SD card is 4gb and IGo8 is about 500mb so heaps of room to put maps on. I have all the Hema 250k maps and all NSW 25k topos on it and still have room left. As it uses the SIRFatlasV chip its very quick at start-up. The iGo8 navigation software is one of the better ones I have used. It's absolutely brilliant .

The sound is very crisp even with the sh1ty Patrol speakers. The best part is the screen and videos...bloody nice!! User-friendliness is much better as my old one so very easy to use. USB is easy as, you just plug in a stick and it automaticly switched over, same with songs on SD card. I would recommend it to anyone.

Took about 10 minutes to install but you will need an ISO adaptor and I found the Holden Rodeo or Mitsubishi Triton (http://www.ebay.com.au/itm/Holden-Rodeo-ISO-WIRING-HARNESS-stereo-plug-connector-/260824862851?pt=AU_Car_Parts_Accessories&hash=item3cba5f9083#ht_3544wt_1110) fit mine. These will depend on which model Patrol you have as they changed depending which stereo unit was installed. $14.95 from Repco, they have heaps of different ones. I think autoban sell them as well.

The only issue I had with install I found the constant 12v and switched 12V where wrong way around, so it wasn't holding its channel memory and would do a long start-up every time. 5 min fix.


If you do get one and need a hand, just yell out mate and we'll have it sorted no time.

[TimE]

Thanks for that Kris.

I'm in the "just looking" mode at the moment. For the past couple of years I have been using a windscreen mounted "no name" GPS from Chinavasion (http://www.chinavasion.com/product_info.php/pName/5-inch-hd-touch-screen-gps-navigator-direct-win-ce-access/) running IGO8 and OziCE, (with a 4gb SD micro card) the screen at 5" is getting a bit small for my poor old eyes now! Also keen to be able to run the music through a USB connection, changing CDs are just too much trouble in the bush.

[Maxhead]

Couple more additions fitted today...

The Pro Locket is now in

Compressor
13333


They fitted the compressor and locker switches arse about. I wanted the locker swich away and next to the sub tank switch just in case,
1333413335



.and also got the HR tow pack fitted with 12 pin plug,50amp anderson, brake controller and break away switch.

Fitted the reverse camera as well

13336

The bloody snorkel hasn't arrived yet....grrrrr

[gowalkabout.com.au]

Looking good.

I picked up my GU8 last night and so far very happy with it.

If you dont mind and have the time would it be possable to pm me a break down on costs of your build

Thanks

[Maxhead]

Looking good.

I picked up my GU8 last night and so far very happy with it.

If you dont mind and have the time would it be possable to pm me a break down on costs of your build

Thanks

No problems mate, I'll get that to you shortly.

Cheers

[Maxhead]

OK, quick mod last night. Converted my bull bar 4" fog lights to 35W HID. Should give a nice down low spread
Should get a workout around here, been foggy as lately.

[growler2058]

They'll burn the eyeballs outa anything that gets in front of ya ;-)


Tappin N Crappin

[Maxhead]

They'll burn the eyeballs outa anything that gets in front of ya ;-)


Tappin N Crappin


Nope! not even close. These are fog light and supposed to be down low which they are. But I will experiment bit more

[growler2058]

Must be morning eyes they look bright from the inside of my head hahahahahahahahaha


Tappin N Crappin

[Oversize]

Must be morning eyes they look bright from the inside of my head hahahahahahahahaha


Tappin N Crappin

You have lovely morning eyes Growler, I can see them from here.

[Maxhead]

Must be morning eyes they look bright from the inside of my head hahahahahahahahaha


Tappin N Crappin


But now you have me worried...LOL

Just had a look on a brick wall at home and they look a lot lower then driving lights. I suppose I'll have to see in real world. Will test them properly this weekend. If theyre no good on the road they'll be great out in the scrub.

Ohh yeah, lovely eyes mate ..hahah

[Maxhead]

And finally got the snorkel fitted today ...ready for some snorkelling..LOLOLOL

14023
14024
14025

Still not sure on the rear bar, but I'm bit broke ATM so it might have to wait a little while...

[Oversize]

Snorkel configurations are interesting. I like your short version, mine fits along the wheel arch and looks chunky but finishes flush with the roof line whereas yours is higher than the roofline and I see issues with low flying pelicans snapping it off. But probably not if you have a roofrack...

[Maxhead]

Snorkel configurations are interesting. I like your short version, mine fits along the wheel arch and looks chunky but finishes flush with the roof line whereas yours is higher than the roofline and I see issues with low flying pelicans snapping it off. But probably not if you have a roofrack...


Haha, you gotta watch those pelicans...LALALA

The snorkel is actually about inline with the roof but the photos show it as way above. Must have been how I took them from below the roof,,,hmm or this trick photography of mine...LOL

[growler2058]

You have lovely morning eyes Growler, I can see them from here.

If ya like the look of poached eggs hahahahaha

[growler2058]

And finally got the snorkel fitted today ...ready for some snorkelling..LOLOLOL

14023
14024
14025

Still not sure on the rear bar, but I'm bit broke ATM so it might have to wait a little while...

Angle of the dangle maybe but jeez your lookin close to the roller door ay

[Maxhead]

Angle of the dangle maybe but jeez your lookin close to the roller door ay


Yeah, mighty close mate, probably have about 120mm spare so my roof racks have to go on outside. Funny thing though, my last GU was 2" lift and I was able to drive in/out with the roof bars on. Now with the TJM 2" I can't. It looks closer to 3-4" lift. I hope it settles a lot more!!!!

[Sir Roofy]

yeah, mighty close mate, probably have about 120mm spare so my roof racks have to go on outside. Funny thing though, my last gu was 2" lift and i was able to drive in/out with the roof bars on. Now with the tjm 2" i can't. It looks closer to 3-4" lift. I hope it settles a lot more!!!!

2.4 is the limit with your roof rack 2'' lift standard tyres
i just scrapped under at the shopping centre,but when i get the new tyres(wish list) ill have to park in the street

[snicko]

Yeah, mighty close mate, probably have about 120mm spare so my roof racks have to go on outside. Funny thing though, my last GU was 2" lift and I was able to drive in/out with the roof bars on. Now with the TJM 2" I can't. It looks closer to 3-4" lift. I hope it settles a lot more!!!!

Looking good there Kris. They just don't make sheds as they should!! We just fit in ours but put the roof top tent on and the Troll has to live outside!

We don't fit in any shopping centre car parks any more either. Made that mistake once!

Loveday will be a great for you to test her out. Hope to see lots of pics.

Would have been funny if you put the roof bars on in the shed then couldn't get the Troll out!! hahaha - NOT!!

[f40]

Great looking Patrol!

I took one for a test drive today and love it!

Does anyone have any more news on the possibilty of lift / bigger tyres affecting the Stability Control?

I really want to get one but need to know i can safely lift it and put bigger tyres.

[Maxhead]

Great looking Patrol!

I took one for a test drive today and love it!

Does anyone have any more news on the possibilty of lift / bigger tyres affecting the Stability Control?

I really want to get one but need to know i can safely lift it and put bigger tyres.

Yes, they are very nice to drive.

Personally I haven't noticed any issues with Stability Control and 2" lift. Not sure how it would affect higher lift though.
I've tried to engage VDC but I must be soft as I haven't managed to do it yet. Maybe it will be easier on dirt...lol

Also F40, jump into the introduction section ans say G'day and tell us about yourself.

[f40]

Yes, they are very nice to drive.

Personally I haven't noticed any issues with Stability Control and 2" lift. Not sure how it would affect higher lift though.
I've tried to engage VDC but I must be soft as I haven't managed to do it yet. Maybe it will be easier on dirt...lol

Also F40, jump into the introduction section ans say G'day and tell us about yourself.

Thanks for the info

Have you put bigger tyres on yours?

[Maxhead]

Thanks for the info

Have you put bigger tyres on yours?

No not yet. Standard tyres till the end of this year. Then I'll put 33's on it

[Waka]

Geez i hope it's ok...I've ordered mine with 33s and am installing a 2" lift straight away. I'll let you know for sure in a couple of weeks. I received a phone message today from Nissan which i'll return tomorrow. hopefully it's to say my new GU8 patrol is ready...but i doubt it.

I hand the muched loved GU7 over to its new owner on Monday and i will be sad to see her go.

Hopefully the new one will be as faithful

Waka

[Maxhead]

Geez i hope it's ok...I've ordered mine with 33s and am installing a 2" lift straight away. I'll let you know for sure in a couple of weeks. I received a phone message today from Nissan which i'll return tomorrow. hopefully it's to say my new GU8 patrol is ready...but i doubt it.

I hand the muched loved GU7 over to its new owner on Monday and i will be sad to see her go.

Hopefully the new one will be as faithful

Waka

Good to hear mate, whats the plan for the new girl???
I wouldn't worry about the 33's and 2", she'll fly...LOLOLOL

[Waka]

Good to hear mate, whats the plan for the new girl???
I wouldn't worry about the 33's and 2", she'll fly...LOLOLOL

The plan is to have it ready for the next boys weekend trout fishing. we're heading up to the Blue Mountains late April so I hope it's ready in time. The Nissan dealer said the car will be with delivered to them next week but it needs to spend a couple of days at ARB getting some bits and pieces added. Apparently they are booked out for 4 weeks! business must be good in the 4wd accessories industry...

you've probably already seen this but it impressed me.

http://www.youtube.com/watch?v=yxv2NFMuiuU

how's yours going?

[Haydog Havoc]

Just wondering what breed of snorkel you fitted and how the stereo was going as i was looking to purchase a simular item for my project.

[Maxhead]

Just wondering what breed of snorkel you fitted and how the stereo was going as i was looking to purchase a simular item for my project.


Mate, sorry for late reply . The snorkel is a Safari, I don't like the airtek ones at all. The stereo is heaps better then my old one, lots more user friendly but one thing...I can't get into windows explorer :( . I only tried once so need to have another go at it. Other wise great unit for the price.

[teno45]

The stereo is heaps better then my old one

Hahaha, was wrong with my one?

[rusty_nail]

mmm nice new and shiny! enjoy washing all the mud off her regularly, shes a beaut!!!

[TimE]

Cheer Tim, Yep running OziExplorer on it now. The supplied SD card is 4gb and IGo8 is about 500mb so heaps of room to put maps on. I have all the Hema 250k maps and all NSW 25k topos on it and still have room left. As it uses the SIRFatlasV chip its very quick at start-up. The iGo8 navigation software is one of the better ones I have used. It's absolutely brilliant .

The sound is very crisp even with the sh1ty Patrol speakers. The best part is the screen and videos...bloody nice!! User-friendliness is much better as my old one so very easy to use. USB is easy as, you just plug in a stick and it automaticly switched over, same with songs on SD card. I would recommend it to anyone.

Took about 10 minutes to install but you will need an ISO adaptor and I found the Holden Rodeo or Mitsubishi Triton (http://www.ebay.com.au/itm/Holden-Rodeo-ISO-WIRING-HARNESS-stereo-plug-connector-/260824862851?pt=AU_Car_Parts_Accessories&hash=item3cba5f9083#ht_3544wt_1110) fit mine. These will depend on which model Patrol you have as they changed depending which stereo unit was installed. $14.95 from Repco, they have heaps of different ones. I think autoban sell them as well.

The only issue I had with install I found the constant 12v and switched 12V where wrong way around, so it wasn't holding its channel memory and would do a long start-up every time. 5 min fix.


If you do get one and need a hand, just yell out mate and we'll have it sorted no time.

Well I bought one Kris, hopefully it should be here in a week or so. I'll give you a holler if I need any help or advice. Cheers

[Maxhead]

Well I bought one Kris, hopefully it should be here in a week or so. I'll give you a holler if I need any help or advice. Cheers

Anytime mate....no stress.

[TimE]

Well the multimedia unit turned up this morning and is now installed and working fine. Things don't usually go that smoothly for me :)

I own a GU IV built in 2005. The adapters I bought from Repco were Double diverysity lead Aerpro AP 348A ($12.99) to convert the Nissan aerial lead to "normal" male aerial plug and an ISO adapter APP0120 ($14.99).

As you mentioned the 12v wire for ignition volts and memory volts where a about t. The ISO adapter had one plug with the power leads fitted with bullet connectors, I simply swapped the yellow and red leads at the bullet connectors and all is now well, no memory loss (stations and other settings). Pity it isn't that simple to restore my own memory:(

I have OziCE up and running, my reverse camera attached via the Aux video in cable, and the DVD "off except with hand brake on" disabled by earthing that wire to the body of the unit.

Thanks for your advice.

[Maxhead]

Had to whack a beaudesert 2.75" exhaust in today..finally wooooooohoooooo

Got the pyro in and will connect tomorrow. So far it seems to be a lot smoother sound wise. Have marginally noticed the pick up a lot lower in the rev range but early days. Should have bit better results tomorrow or especially when I take the caravan in for a service next week.

My exhaust jack should work now with a straight cut end pipe...LOLOL

[Waka]

nice work.

[Maxhead]

Had to whack a beaudesert 2.75" exhaust in today..finally wooooooohoooooo

Got the pyro in and will connect tomorrow. So far it seems to be a lot smoother sound wise. Have marginally noticed the pick up a lot lower in the rev range but early days. Should have bit better results tomorrow or especially when I take the caravan in for a service next week.

My exhaust jack should work now with a straight cut end pipe...LOLOL


WOW, what a difference!!1

Just went for a ride up the hills and the difference is unbelievable....no more gear changes....LOLOL Just put your foot down a bit and it just pulls hard in 5th. Love it

I have a good feeling it will pull the caravan with ease and cheaply... in fact I know it will...HAHAH

Should have done this as a 1st mod

[Woof]

WOW, what a difference!!1

Just went for a ride up the hills and the difference is unbelievable....no more gear changes....LOLOL Just put your food down a bit and it just pulls hard in 5th. Love it

I have a good feeling it will pull the caravan with ease and cheaply... in fact I know it will...HAHAH

Should have done this as a 1st mod

Should not to driving and eating at the same time mate....LOLOLOLOL

[Maxhead]

Should not to driving and eating at the same time mate....LOLOLOLOL

Hhahaha, bloody food always gets in my way....LOL...good pick up mate

Installed the Auber EGT gauge this arvo and went for a spin...bloody temps get upto 600 pretty quickly. Pretty sure the CRD's run a bit hotter then Di's so could be good.
Wonder what they're like with the van on...hmmmm

[Woof]

Coopers, not bad at all Kris.

[Maxhead]

Coopers, not bad at all Kris.


Hahaha, love my coopers..

[growler2058]

Hahaha, love my coopers..

Best beer in the world!

[Maxhead]

Ok, took me a while but its finally done......my new accessories to the Patrol is Rhino rear boat loader...what a pi55er. best $200 I ever spent... I can't believe the bargain I got, and the guy I bought it of even dropped it off and showed me how it goes together.( Top bloke as well) It was supposed to have a couple of bits missing but everything was there with a fair few extras.

Got the loader, roof bars and a roof basket all for $200...OK, OK...I'm bragging now :)

SOOOOOOOOOO MUCH EASIER

couple of pics
16805
16806
16807

Just about ready to take off on our trip...WooooHOOOO

[growler2058]

Wow fancy pants!! That tinny looks BIG on the roof! Oh yeah took ya bloody time ;-)


Tapp tillya Crap

[Maxhead]

Wow fancy pants!! That tinny looks BIG on the roof! Oh yeah took ya bloody time ;-)


Tapp tillya Crap

Yeah looks big on the roof and off, but I need something that size for those big barra I need to fit in it...HHAHAHAHA

[Maxhead]

Installed the Auber EGT gauge this arvo and went for a spin...bloody temps get upto 600 pretty quickly. Pretty sure the CRD's run a bit hotter then Di's so could be good.
Wonder what they're like with the van on...hmmmm

Well got the van on the back, boat on the top and went for a quick test drive and the temps got up to past 800 deg..:oops:

Had me worries for a sec then I remembered I bought the gauge in USA...the rest is self explanatory:1087: LOL

Ok, Ok I'm ready for it.....HAHAHA


Edit: ohh yeah, the temps are below 400 deg CELSIUS now

[Maxhead]

New wheels and rubber on the truck now.

King 16x8 rims with 285.75.16 BF Goodrich KM2's

21002
21003
21004

Not used to this crap weather. 10 deg outside and raining.

New rear bar just about ordered just need to finalise few other things





........... On the move

[growler2058]

Hey hey looks good maybe now you can come follow agatha where GU's fear to tread ;-)


Sent via my tapping thumbs

[Maxhead]

Hey hey looks good maybe now you can come follow agatha where GU's fear to tread ;-)


Sent via my tapping thumbs



Hahahahaha, and keep towing her out ...:)

joking mate,,,, should go a bit better now but thinking I need a bit more flex so thats my next project. I still want a decent ride for touring/towing

[nissannewby]

You will be bvery pleased with those tyres :)

[Maxhead]

A couple of small editions.

Thanks to Mal I now have myself a Harris Hardcase

And also thanks to Torque 4x4 I have some decent recovery points. Just need another side bolt to go in.
21309
21310

My rear bar is ordered through Raslarr Engineering which I will have mounted when I go to the Vic meet up:)




..........on the move.

[growler2058]

Starting to look like a real patrol mate :-)

[Maxhead]

Starting to look like a real patrol mate :-)

Yep, it's real it's a GU. ;)




..........on the move.

[growler2058]

Yer right its very very GUrly

[Steve200b]

Very nice work

[krbrooking]

It is a very nice looking ride. I am so jealous of you man, I will get there one day.


One power ball!!!!!!!

[Winnie]

It's not bad for a Girl Unit.

[mattallin]

Nisshead, love the rig! Where did you get your Watchdog for the CRD from? Was thinking of getting a Scangauge for my 2011 but this Watchdog looks the business!

[Maxhead]

Nisshead, love the rig! Where did you get your Watchdog for the CRD from? Was thinking of getting a Scangauge for my 2011 but this Watchdog looks the business!

Hey Mattallin, Welcome to the forum.

I got the watchdog on Amazon for I think $204 but looks like they have gone a little. http://www.amazon.com/Bully-Dog-40402-Economy-Monitor/dp/B001P20QD8/ref=sr_1_9?ie=UTF8&qid=1351714434&sr=8-9&keywords=watch+dog

it is a good unit except when you have it set to metric units the boost is displayed in KPA which is a pain but you learn the reading pretty quick so no biggie.
Also the wiring needs 12v not like the scangauge.

Jump into the introduction section mate and tell us a bit about yourself.

Cheers

[Maxhead]

The rear bar is getting put on right now :) wooohooo

.........on the move

[nissannewby]

What sort of bar did you go for?

[AB]

photos mate....Actually Ill be seeing it in 3 hours...LMAO

[Maxhead]

It's the raslarr engineering one... Pics soon

.........on the move

[Maxhead]

OK, some pics as promised.
I'm really happy with it except I keep forgetting to open the swing arm before the door ...lol
The 4" reverse lights are awesome

[Winnie]

I rang that bloke up today regarding rock sliders and he is gonna do a quote for me

DIAL-A-TAP

[Maxhead]

I rang that bloke up today regarding rock sliders and he is gonna do a quote for me

DIAL-A-TAP

Good stuff, hope it works out. Hes got some pictures up on facebook of different vehicles including a gq

[Lonicus]

Mate, that is one seriously tricked out Patrol!! Awesome fit out.

Thanks for the tips on the exhaust too. I went the chip and exhaust costs LOTS route and SWMBO was quite pleased with the comparative low cost of just the exhaust :)

Mind you, "quite pleased", is a relative term. It's not like she said "go buy it now" but there's room for hope :)

[Maxhead]

Thanks for the tips on the exhaust too. I went the chip and exhaust costs LOTS route and SWMBO was quite pleased with the comparative low cost of just the exhaust :)



Hahaha, good work! better give beaudesert a call and order first thing in the morning before she changes her mind...lol

[create]

Love that rear bar!
Nice one Kris.

[Oversize]

Very nice indeed! Happy to park next to her again but what of the windows??? I notice the pics cut them out??? Or are you not telling us something...

[Trifer]

Awesome rig nisshead. Great build up.
Has given myself some ideas for when I search and find one of my own.

Might even be sooner now that I've seen what you've accomplished. Haha
Really looks fantastic

[Maxhead]

Very nice indeed! Happy to park next to her again but what of the windows??? I notice the pics cut them out??? Or are you not telling us something...


Hahahaha, you want to see windows as well..lol OK OK I'll take a photo for ya...lol

[Maxhead]

Awesome rig nisshead. Great build up.
Has given myself some ideas for when I search and find one of my own.

Might even be sooner now that I've seen what you've accomplished. Haha
Really looks fantastic


Thanks a lot Trifer, I'm very happy with it so far....just need some decent flex and reduction gears and she'll be nearlly finished and in time to sell to get another...lololo



OK OK may be not this time

[Trifer]

Gonna sell it to buy the "all new patrol" with the 5.6ltr v8 petrol huh. Lol
Let me know how it goes on economy lmao

[Trifer]

Just curious, did u do all the nads or only some to the new rig??
Thanks

[Maxhead]

Just curious, did u do all the nads or only some to the new rig??
Thanks

No NADS mate. its the mighty CRD...hahaha
But I do hacve boost and EGT gauges to monitor whats happening

[Trifer]

Oh thanks. I thought nads were for all zd30's.
Nice to know crd doesn't need them.

[Maxhead]

Ok, another quick mod. Just hooked up the 4" led reverse lights through a switch so I can use them as camp lights.


Legal as well so the lights come on in reverse even tho the switch is turned off.

23708
23709
23710


.........on the move

[growler2058]

Good job!! Pity the switches aren't straight ;)


Merry Tapped Out Xmas

[Maxhead]

Good job!! Pity the switches aren't straight ;)


Merry Tapped Out Xmas



Hahah, smartarse.....had to go and fix...I think one side wasn't clipped in right....yeah, yeah I know dodgy but its done now!!

[growler2058]

Hahahahaha I was only takin the pi55 jokin can't see on the phone properly


Merry Tapped Out Xmas

[Maxhead]

Hahahahaha I was only takin the pi55 jokin can't see on the phone properly


Merry Tapped Out Xmas

Was a good pi55 take ...bwahhahah. Yeah the top switch must have been out 1 not which I didn't notice till I looked at the photo when you said it..lol

[MEGOMONSTER]

They look like they'll be pretty bright at night.

[Maxhead]

They look like they'll be pretty bright at night.

Yeah they sure are, They will be great!! Also, I haven't come into a situation where I needed dim reverse lights yet.

[Maxhead]

I was just doing some maintenance/clean up and noticed I am still carrying bit of Loveday 4x4 with me..lol
24271
24272
24273
24274


And whoops, how did that plate get in the're :eek::confused:...hahah

24276
24277
.........on the move

[Maxhead]

Just picked up the truck from Mr Nissan after they replaced the TPS, I dunno why I waited so long to get it fixed, its like a different vehicle now with a new TPS!!!

Funny comment on the work print out " someone blocked the EGR system and this will generate error codes" woops

[MEGOMONSTER]

Funny comment on the work print out " someone blocked the EGR system and this will generate error codes" woops

Just had mine serviced and they said nothing and EGR IS BLOCKED.

[Maxhead]

Just had mine serviced and they said nothing and EGR IS BLOCKED.

I'm guessing the plugged their computer in and saw previous egr errors and investigated, yeah I know its not like Nissan to do something like that...LOL
I'm actually happy with their service, never had any dramas getting work done.

[MEGOMONSTER]

I'm actually happy with their service, never had any dramas getting work done.

Me too, very happy, sort of, except when they ring me and tell me one of my fog lights don't work so I say replace it. They then ring me back and say they have no stock so I say order it and ill pick it up on a later date.
I pick up the car and all fog lights working.
But one of my SPOT lights (HID) doesn't work.

Mental note to self: fix HID SPOTTIES.

[Mentok]

G'day Nisshead. Great looking Troll mate. How much did the Raslarr rear bar set you back? It looks really good on your rig.

[liveyk7]

Howdy NISShead! Awesome Looking troll mate! Well done... Ive gotten a 2004 GU IV (Downgrade from a 2012 Pathy, some call it an upgrade! LOL) and doing it up slowly... a couple of questions if you dont mind mate.. and please excuse my language/tech terms, i am a beginner at these!
1) The BullyDog Watchdog thingo you got, it connects upto the ECU doesnt it? So it eliminates the need for all gauges execpt for the pyro which i can purchase seperately yeah? Where did you get it from?
2) The reverse lights, did that come with the rear tyre holder?

cheers mate..
livey

[Winnie]

Ive gotten a 2004 GU IV (Downgrade from a 2012 Pathy, some call it an upgrade! LOL)

Definitely an upgrade mate!


Sent from my iPad using Motorculture mobile app

[Maxhead]

Howdy NISShead! Awesome Looking troll mate! Well done... Ive gotten a 2004 GU IV (Downgrade from a 2012 Pathy, some call it an upgrade! LOL) and doing it up slowly... a couple of questions if you dont mind mate.. and please excuse my language/tech terms, i am a beginner at these!
1) The BullyDog Watchdog thingo you got, it connects upto the ECU doesnt it? So it eliminates the need for all gauges execpt for the pyro which i can purchase seperately yeah? Where did you get it from?
2) The reverse lights, did that come with the rear tyre holder?

cheers mate..
livey
Yes the bullydog connects to the odbII plug under your steering wheel which connects to the ECU.I got it on Amazon for I think $204 but looks like they have gone a little. http://www.amazon.com/Bully-Dog-4040...ords=watch+dog

it is a good unit except when you have it set to metric units the boost is displayed in KPA which is a pain but you learn the reading pretty quick so no biggie.
Also the wiring needs 12v not like the scangauge.

Just remember it is not compatible with a GU4 it will only work with the CRD engines. There are other devices that will work with yours mate.

The 10W 4" LED lights come standard with the rear bar.

[Maxhead]

Been a bit quite on any updates lately but I have finally fitted my new Brown Davis long range tank. 148l :)

I'm surprised how well it fits and it actually sits higher than the standard tank I think.

Bring on the Simmo!!!!!

[MudRunnerTD]

Wow that looks tidy Kris! I have a Long Ranger and it sits down lower than that by quite a bit! Is that the Nissan Towbar in the pic? If it is then your BD tank is at Least 3" higher than my Long Ranger!!!!! For that Alone its a better tank!

It looks about the same height at the diff though? Hmmmm that depends on the lift though hey. I will take a couple of pics of mine mate and post them here for your interest.

[Stropp]

@ MR i will get a pic of my long ranger as it sits the same as Kris's tank and its a 148ltr as well ! BTW Kris coming along nicely mate.

[Maxhead]

Wow that looks tidy Kris! I have a Long Ranger and it sits down lower than that by quite a bit! Is that the Nissan Towbar in the pic? If it is then your BD tank is at Least 3" higher than my Long Ranger!!!!! For that Alone its a better tank!

It looks about the same height at the diff though? Hmmmm that depends on the lift though hey. I will take a couple of pics of mine mate and post them here for your interest.

Cheers mate, The bar is a Hayman Reese bar.

I'm pretty happy with how it sits, I would expect the LR tank be similar.....

[MudRunnerTD]

@ MR i will get a pic of my long ranger as it sits the same as Kris's tank and its a 148ltr as well ! BTW Kris coming along nicely mate.

That's interesting! I got my second hand and it came out of a GQ. That is very interesting!! If the GU one sits higher then fitting a GU LRA tank to a GQ with a Body Lift could see it sitting higher too! Hmmmmm? Cool! Post some pics please for sure! We might even go back to Kris's other thread about LRA v BD and post some pics to that thread

[MudRunnerTD]

Check this out

38187

38188

38189

38190


Sent from my iPhone using Motorculture mobile app

[Stropp]

yeh MR mine was secondhand out of a gu. will double check and post a pic when i get home

[MudRunnerTD]

I think I have figured it out! I have a Kaymar rear bar now and it has an integrated Towbar. So my hayman Reece has been removed and would have sat below the bar and in that space I reckon.

[Stropp]

yep looking at the pics i can see that now

[Maxhead]

Yeah, the front of the tank sits similar to the diff but the back just looks lower couse of your bar, thats all

[Dave_H]

Nice setup mate. The watchdog you have will that plug into my 08 gu6 3.0crd?

[Maxhead]

Nice setup mate. The watchdog you have will that plug into my 08 gu6 3.0crd?

It sure will mate, any CRD

[Warwick89]

It sure will mate, any CRD

Mate probably a stupid question but how many different sensors does that unit read straight from the car?

[Maxhead]

Mate probably a stupid question but how many different sensors does that unit read straight from the car?

It should read any sensor in the vehicle and you can get an optional attachment for EGT temps.. but if I had my time again I would probably go with a Scangauge.
I explained some issues in this thread ...I'll try and find it for you so I don't have to retype..LOL

Here:


I got the watchdog on Amazon for I think $204 but looks like they have gone up a little. http://www.amazon.com/Bully-Dog-40402-Economy-Monitor/dp/B001P20QD8/ref=sr_1_9?ie=UTF8&qid=1351714434&sr=8-9&keywords=watch+dog

it is a good unit except when you have it set to metric units the boost is displayed in KPA which is a pain but you learn the reading pretty quick so no biggie.
Also the wiring needs 12v not like the scangauge.



Cheers

[Warwick89]

So other then the KPA readings there is no big downside?

[Maxhead]

So other then the KPA readings there is no big downside?

Not all a mate, it actually teaches you to drive to obtain maximum fuel efficiency through throttle control and braking...its pretty good

[Warwick89]

Sorry for all the questions but if that's the case why would you go a scangauge?

[Maxhead]

Sorry for all the questions but if that's the case why would you go a scangauge?

No problems mate but it's because Im lazy and my brain is too slow too convert boost pressures from KPA to PSI and wiring an extra 12v to the unit was a pain...LOL

BTW the unit will work without ACC 12v, but it will stay on constantly

[Mitch.mccabe]

hey nisshead, I noticed the 7inch navigator, was this the all in one job from Nissan? I have one of the Nissan jobbies in my 2013'. Trying to find out if I can update for topos like oziexplor, or hema map type setups

[Maxhead]

hey nisshead, I noticed the 7inch navigator, was this the all in one job from Nissan? I have one of the Nissan jobbies in my 2013'. Trying to find out if I can update for topos like oziexplor, or hema map type setups


Yey Mitch, no its an aftermarket unit from eonon which is OK but nothing special. I don't think you can get oziexplorer onto the Nissan ones unfortunately. BTW, these things are only $300 and come with navigation and you can run ozi on it..LOL

[Maxhead]

Single flywheel heavy duty clutch is in and feels great!!!

Feking Nissan wanted $4600 to replace the old one after 30000km...lol

Conversion and new clutch was 2000 bucks and it feels sooooooooooooooooooo much better...lol

[growler2058]

Single flywheel heavy duty clutch is in and feels great!!!

Feking Nissan wanted $4600 to replace the old one after 30000km...lol

Conversion and new clutch was 2000 bucks and it feels sooooooooooooooooooo much better...lol


Nice.................now bring on Loveday MUD!!

[Maxhead]

Nice.................now bring on Loveday MUD!!


Yep, this time I'm bringing wings for the GU...LOL

Farking horrible shit that Loveday mud!!!

[jarrah]

gnarly build thread mate! rear bar work looks awesome.

thats repulsive only getting 30,000 outa your clutch. i am currently dealing with the folks at nissan because they put a cheap dmf in instead of genuine. i didnt have to pay for labour though as it was under warranty so only paying parts. with a bill for 4600 id be straight onto the single. i will be going single next time when the car is older as i didnt want the rough driving.

with your single install can you feel the low rev shudder/vibration? whats brand u go with?

cheers mate

[Maxhead]

with your single install can you feel the low rev shudder/vibration? whats brand u go with?

cheers mate

So far it feels great, no noticeable shudder at all but I haven't really driven it a lot. All I can say it feels like there is instant pull from take off unlike before.

I put in the Exedy Safari tough HD clutch

[threedogs]

in regards to your Rassler rear bar, don't they have it
that if you un hook the wheel the rear door opens as well

[Maxhead]

in regards to your Rassler rear bar, don't they have it
that if you un hook the wheel the rear door opens as well

They have that option, it's a bloody clever idea.
Unfortunately that wasn't an option when I got mine installed .

I can get it now if I wanted to for $400



+ $450 Per Swing Away choice of Tyre Carrier or Double Jerry Can Holder
+ $400 Self Opening Feature, this can only be applied on the main barn door
+ $149.95 Aurora 5w LED Flood Reverse Light with Self Adjusting Light Pole
+ $69.95 Self Adjust Light pole (No Light provided)
+ $200 Colour Coding is available, this is only for the rear bar.

[BigRAWesty]

Wow $150 for a bit of steel and a 15W light.
I charge to less!!!

[threedogs]

@ NH heres your new gear knob @ SCA this weekend,
Rule one no one else is allowed to buy one lol

[Winnie]

Krisso is a knob but he's not a farkin wanker!

[jarrah]

So far it feels great, no noticeable shudder at all but I haven't really driven it a lot. All I can say it feels like there is instant pull from take off unlike before.

I put in the Exedy Safari tough HD clutch


cheers mate, sounds similar to when i put it in my old DI. drip is just instant. let me know if you start getting the vibration etc.

[PMC]

After a bit of waiting she's finally here :) Picked her up on Friday

...Warning some nude vehicle pics here...LOL


She's just a bog standard without any options at all, so now the fun part begins. Dressing her up.

This week we'll have:

Steel bar
12000lb winch
front pro locker
side sliders
side protection bar
dual battery
55W HID XRay Vision lights
Suspension upgrade and 2"lift
HR tow pack.
7" GPS Entertainment unit
Bully Dog Gauges
and few other small bits

Will update with some decent pics soon

G'day Nissheads GU8,

Finally locked through your thread.

Very nice set-up their mate!

Regards,

Paul

[Maxhead]

A little bit of an addition to the vehilcle ( or should that be a fix..lol)

I have now fitted a new Toughdog adjustable steering damper, a Toughdog adjustable panhard rod and a new 38mm solid chrome moly 4140 tie rod . Off to the wheel aligners and I'm back in business:)

[jack]

OK I'm jealous, I'll admit it.

[NissanGQ4.2]

A little bit of an addition to the vehilcle ( or should that be a fix..lol)

I have now fitted a new Toughdog adjustable steering damper, a Toughdog adjustable panhard rod and a new 38mm solid chrome moly 4140 tie rod . Off to the wheel aligners and I'm back in business:)

Are you only now replacing the busted steering damper from the meetup or did you temporary fix it?

[Maxhead]

Are you only now replacing the busted steering damper from the meetup or did you temporary fix it?

Nah, I replaced the damper a while back but have now added the panhard and tie rod. Im ganna do the draglink soon as well but need to sort some other issues out...lol

[growler2058]

Lessons learnt?

Don't get massive massive rear wheel nose diving air time then skull drag the bitch face first over half a fallen forest? HAHHAHAHAHHAA

[Winnie]

Lessons learnt?

Don't get massive massive rear wheel nose diving air time then skull drag the bitch face first over half a fallen forest? HAHHAHAHAHHAA

Nope! Next time get more air so the poor steering damper clears the log and doesn't get smashed!

[Maxhead]

Lessons learnt?

Don't get massive massive rear wheel nose diving air time then skull drag the bitch face first over half a fallen forest? HAHHAHAHAHHAA

It was all soft mud...got no idea how it happened...LOL


Nope! Next time get more air so the poor steering damper clears the log and doesn't get smashed!

Comp spec chrome moly has lifetime warranty so should just bounce off, but I like the way you think...bwahahah

[growler2058]

It was all soft mud...got no idea how it happened...LOL Comp spec chrome moly has lifetime warranty so should just bounce off, but I like the way you think...bwahahah

You'd figure a way to fork it still

[Maxhead]

Nah, I replaced the damper a while back but have now added the panhard and tie rod. Im ganna do the draglink soon as well but need to sort some other issues out...lol

Ordered a new adjustable draglink to get my steering wheel straight, it's solid 38mm chrome moly 4140 .

so I now have new panhard, damper, tie rod and draglink- thanks to a little mishap not long ago..lol

I also found the problem(actually two) with the front air locker, the bloody 60a relay was shot which I now replaced and now have a small wire open circuit from the switch to the relay as well. Sort that out tomorrow :)

Once I clean it after next weekend it's off to Mr Nissan to get the right hub sorted

Then it will be like new again....lol

[Winnie]

Until your next brain fade... Hahaha

[Maxhead]

Until your next brain fade... Hahaha


Brain Fade??? Mate, I did it for the team! Someone had to get across to pull you lot through...that's my story and I;m sticking to it!

[Winnie]

Suuuuuure!

[Bloodyaussie]

Thats not how I remember it...?

[Maxhead]

Suuuuuure!


I don't remember you trying??

[Maxhead]

Thats not how I remember it...?
You were too busy scuba diving in mud to find Sean's recovery point...lol

[Maxhead]

New dimple drilled claw grooved rotors and pads fitted this week. I'll see how they go over next couple of weeks towing. Hoping they're an improvement over the standard crap.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=61537&stc=1http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=61536&stc=1http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=61535&stc=1

[Fwdpatrol]

New dimple drilled claw grooved rotors and pads fitted this week. I'll see how they go over next couple of weeks towing. Hoping they're an improvement over the standard crap.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=61537&stc=1

http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=61536&stc=1http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=61535&stc=1

So how did they go
What was that set up,worth

[Maxhead]

So how did they go
What was that set up,worth

Don't know the performance yet but will in the next couple of weeks.

http://www.ebay.com.au/itm/DRILLED-SLOTTED-PAIR-FRONT-REAR-DISC-BRAKE-ROTORS-BENDIX-PADS-GU-Y61-PATROL-/121605403583?hash=item1c503f33bf

[Maxhead]

GU8 having another wheel stretch.
Camp on Macquarie river near Dubbo:)
http://www.nissanpatrol.com.au/forums/images/imported/2015/09/348.jpg
http://www.nissanpatrol.com.au/forums/images/imported/2015/09/349.jpg

Can anyone guess the rock carvings??
http://www.nissanpatrol.com.au/forums/images/imported/2015/09/350.jpg


Sent from my iPhone using Tapatalk

[threedogs]

Are they marks from sharpening axe heads etc,
nice rotors dont forget to bed them in

[Maxhead]

Are they marks from sharpening axe heads etc,
nice rotors dont forget to bed them in

Yep, spot on John
http://www.nissanpatrol.com.au/forums/images/imported/2015/09/351.jpg


Sent from my iPhone using Tapatalk

[Maxhead]

Expressions of interest if anyone is interested.
This vehicle will be detailed and on the market in a while.
Lifestyle change and requirements ask for a different vehicle so this has to go to accomodate a newby:(

Still only 58000 KM on it and a year of extended manufactures warranty left!

See what happens[emoji3]







................on the road

[growler2058]

What ya buyin now cockO

[Maxhead]

What ya buyin now cockO
I think an isuzu dmax at this early stage







...........on the road

[mudski]

Nooooooooooooooooo!

Sent from my GT-N7105T using Tapatalk

[Clunk]

Nooooooooooooooooo!

Sent from my GT-N7105T using Tapatalk
Why not?.....

[Hodge]

Shame Kris . Hope it works out.
At least you got a good choice of ute.

Sent from S5

[Clunk]

I think an isuzu dmax at this early stage







...........on the road
I too have also been thinking of crewcabs

[Maxhead]

I too have also been thinking of crewcabs

Yeah mate, it would suit my needs perfectly.








................on the road

[growler2058]

I think an isuzu dmax at this early stage







...........on the road

Pharkin PFC!

[Maxhead]

At this stage this is what I can come up with:


TJM deluxe Steel bar
12000lb TJM winch with 30m rope
TJM Front pro locker
Standard real diff locker
TJM Underbody protection
TJM dual battery system (second battery included)
GME TX3540 80 channel remote UHF
Sliders
Brush bars
55W HID XRay Vision lights
TJM XGS Gold suspension upgrade and 2"lift
HR tow pack.
7" GPS Entertainment unit with Australia Hema maps included
Bully Dog Gauges
Homemade rear shelf system with fridge area
Fog lights converted to 35w HID
Safari snorkel
Beaudesert 2.5” exhaust with pyro and display incab
King 16x8 rims with 285.75.16 BF Goodrich KM2's(40%)
Harris Hardcase diff protector
Torque 4x4 recovery points
Raslarr Engineering rear bar (single wheel but with extra point for second)
Brown Davis Long Range tank 148l
Dimpled and grooved rotors front and back with near new Benix pads
Tough dog steering damper
Comp spec chrome moly draglink, tierod and penhard
Rhino roof racks with a 1.2x1.2 roof cage
Fishing Rod tube which connects to roof racks

There's more fruit on it which I cant think of ! I'm looking at $37K but will negotiate with members of this forum other wise it will go on the market for $38

It has a few dings and scratches but a good reliable truck, served me well even through most extreme situations lol. Served my family through half a lap of Aussie and did it with ease townin for 16000 kms

Yes I should put this in for sale saecrion I know...but im pissed...bwahhhahah

[Clunk]

A few dings hahahahaha

[Maxhead]

A few dings hahahahaha

Yep and not ashamed of them , I pretty much know where they come from..lol

Unfortunately that is what it is , no point bulshithing about it .

You know what I me though[emoji3]







................on the road

[Kimbo63]

How about something like this krisso 70849
Saves you changing your profile name to Isuzuhead

[Avo]

we have 3 of them on the farm and another as a weelky driver,not bad vehicles,we have a 2010,2013 and 2015 and a 2016

still got the GQ ute aswell with only 150 thou...but i am trying to claim that one as a bonus

[Maxhead]

How about something like this krisso 70849
Saves you changing your profile name to Isuzuhead

Yeah nah, I thought about it but couldn't do the chop. Mate of mine has one, pretty cool[emoji3]







................on the road

[Maxhead]

we have 3 of them on the farm and another as a weelky driver,not bad vehicles,we have a 2010,2013 and 2015 and a 2016

still got the GQ ute aswell with only 150 thou...but i am trying to claim that one as a bonus

Yeah, most of the reports seem pretty good so far[emoji3]







................on the road

[Winnie]

Dmax would be my choice of a dual cab too.

[mudski]

Yeah I sold my Dmax to buy my Patrol. It went really well and had plenty of mojo thats for sure. Just quite small in the rear seat section.
70851

[Hodge]

Dmax all the way. If I needed a ute . Dmax hands down .

Sent from S5

[Rossco]

Sad to see the old bus go Krisso (not so old) I'd buy it if i had a spare 37G. . and if the GQ wasn't so awsome . . .

Yeah we've got DMax's at work, I like em, nice & simple not ruined but stupid electronics that try to take over everything. Used to have Ranags absolutly hated those things plus they had lots of issues. DMax's have been reliable as. . .

[Winnie]

Yeah I sold my Dmax to buy my Patrol. It went really well and had plenty of mojo thats for sure. Just quite small in the rear seat section.
70851
Whoah sweet rims cuzzy bro

[mudski]

Whoah sweet rims cuzzy bro

Better than the poxy cheese cutters you get from factory. Atleast it had on road grip with those on. The original ones were just dangerous. Plus when its a work car and was all stickered up it looked the part. Bro.

But yeah Krisso. Good choice in vehicle. I actually like their MUX they have. Good for a family wagon. Which is just a Dmax with a wagon body.

[Maxhead]

Ill whack a for sale ad when the car has been cleaned up and I take some pics. Far out car detailing is bloody expensive. Id do it myself if I had the time and I wasnt so lazy...lol







...........on the road

[mudski]

To busy making your moonshine bud?

[NissanGQ4.2]

I'm looking at $37K but will negotiate with members of this forum other wise it will go on the market for $38


Lucky I'm member of this forum, I'll give you $38 for it, for that bargain of a price I'll even give you my Crappadore and GQ for paddy bashers *LMAO*

[Maxhead]

Lucky I'm member of this forum, I'll give you $38 for it, for that bargain of a price I'll even give you my Crappadore and GQ for paddy bashers *LMAO*

Haha, no thanks[emoji2]
The price reflects the current market value of these cars with low k's.
I'm not even adjusting for the accessories which is a shame but that is life.

If people think that is too high please let me know and as I said I am happy to negotiate.

Market will definitely dictate what I get for it so time will tell but I think it's a good starting point[emoji3]

EDIT: and I know you only ferking around:)







................on the road

[Maxhead]

Goodbye
http://www.nissanpatrol.com.au/forums/images/imported/2017/04/196.jpg







................on the road

[growler2058]

Sad sad day!