1MadEngineer
16th December 2011, 01:08 PM
Hey guys,
For the guys that don't know me, my name is Greg and i do engineering consulting and design work for the automotive industry. My passion is for nissan stuff! Ages ago I asked the question as to what stuff all my mates (and public) wanted designed/developed. One of the big things i got asked for was to develop a bolt on spring tower brace for GU's to help stop the chassis cracking. Well after 18 months of designs, revisions and load testing , then patiently waiting for patent approval (P-PN# 2011 904 187) , they are now ready for full production.
They are designed so they can be bolted into standard vehicles even ones with ABS. The design allows redistribution of the loaded force forward and down - into the large main upper link crossmember and also some of the residual force back and into the rear chassis / tank cross tube. Both connection points have adjustable tensioner's which can accomodate chassis's which may have already suffered (non-fatal) deformation.
OK so they might not allow you to raise your GVM by 10 ton, but they will definately help stop that fatigue loading and tearing that we are all to familiar with and the added benefit is they can be fitted by anyone with a few basic spanners and a bit of patience! As we all know - DAMN its tight under there! sometimes i wish i had a 2nd wrist...
Anyway, here are some teaser pics!
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBracesubassys.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBracesubassys3.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBracesubassys2.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBraceimg3.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBraceimg2.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBraceimg1.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/bracelayout1.jpg
any ideas or thoughts please let me know!
cheers
Greg
For the guys that don't know me, my name is Greg and i do engineering consulting and design work for the automotive industry. My passion is for nissan stuff! Ages ago I asked the question as to what stuff all my mates (and public) wanted designed/developed. One of the big things i got asked for was to develop a bolt on spring tower brace for GU's to help stop the chassis cracking. Well after 18 months of designs, revisions and load testing , then patiently waiting for patent approval (P-PN# 2011 904 187) , they are now ready for full production.
They are designed so they can be bolted into standard vehicles even ones with ABS. The design allows redistribution of the loaded force forward and down - into the large main upper link crossmember and also some of the residual force back and into the rear chassis / tank cross tube. Both connection points have adjustable tensioner's which can accomodate chassis's which may have already suffered (non-fatal) deformation.
OK so they might not allow you to raise your GVM by 10 ton, but they will definately help stop that fatigue loading and tearing that we are all to familiar with and the added benefit is they can be fitted by anyone with a few basic spanners and a bit of patience! As we all know - DAMN its tight under there! sometimes i wish i had a 2nd wrist...
Anyway, here are some teaser pics!
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBracesubassys.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBracesubassys3.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBracesubassys2.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBraceimg3.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBraceimg2.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/TowersupportBraceimg1.jpg
http://i158.photobucket.com/albums/t108/1MadEngineer/bracelayout1.jpg
any ideas or thoughts please let me know!
cheers
Greg