wanted pictures of snorkel in engine bay for 07 patrol

[my third 256]

please can someone help as im not too sure where the plumbing goes because of the second battery
thanks stephen

[AB]

Do you mean the inlet for the snorkel to airbox or post airbox?

Or just the whole set up....lol

[my third 256]

the inlet to the airbox please ab does it interfeer with the position of the 2nd battery thanks

[AB]

Hopefully someone with an 07 Patrol can help you out mate.

FWIW anyway, below are photos of my stock GQ airbox with the 4" snorkel line and a photo of the GU filter set up with the reducer going to the 4" snorkel with dual battery tray. Very tight fit but can be done.

No issue with the inlet, just the GU filter is a tight fit in the corner with the dual battery tray.

[Maxhead]

Mate, it doesn't interfear with any thing. Here's a couple of general shots. Let me know if you want a more specific one.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=10973&stc=1&d=1323549929

[my third 256]

thanks NisPat thats just what i wanted
the boss said i could have one for xmas
thanks also AB

[grimace]

g'day champ i have a 2008 model and also second battery all plumbing goes up the inner guard no worries, are you gonna install yourself? i didn't for the sake of a bit of extra coin its not worth the headache just drop it off pick it up and you beauty!

[my third 256]

yes i think that is the best idear to get it done ARB to do

[WhiteGU]

It's not hard to do yourself - I did mine. The Safari for the CRDs has one large hole in the guard which is so big you can cut out with good tinsnips or a nibbler. Top 1/3 of the hole has tar paper stuck on the inside of the guard which was the worst bit to do as it became too thick for the nibbler.

[Shaunous]

Arrrrrrrrrrrrrrrrrr so this would pretty much be the same for me GU RD28, i've never paid attention to them on cars and didnt realise they ran under the gaurd. I was wondering the same thing myself.

Cheers...