PDA

View Full Version : Error codes -36, 47 and E4



_Greg
9th December 2011, 06:14 PM
Can anyone help please. my 98 RD28eti patrol is throwing three codes:


36 fuel cut s/v


47 rpm sensor (TDC signal side)


E4 breakdown


where would i start looking for the sensors that are causing these codes. I just got back from a Diesel service place where they changed the injectors and tuned the engine. the read off the error codes, but had no idea how to fix them.

The car lacks in a bit of power, has problems when cold - i.e. when you put your foot down it crawls along, and diesels on after the car is turned off.

Any assistance would be appreciated.

Greg

Bigrig
9th December 2011, 06:27 PM
Crikey - they're good ones fella ... hopefully someone knows where to look to help out!!!

AB
9th December 2011, 08:25 PM
Hi mate, have a look at this thread below...

http://www.nissanpatrol.com.au/forums/showthread.php?595-Reading-and-erasing-GU-Patrol-fault-codes&highlight=erase+fault+codes

_Greg
9th December 2011, 09:28 PM
Thanks AB

had a look and they do not seem to relate to the codes i was given by the diesel service place above?