PDA

View Full Version : values for all sensors on a ZD30 engine



bonysand
6th December 2011, 05:25 PM
Hi guys, i am just after some values /specs on all the sensors on a ZD30. i have exhausted all avenues searching the web with no luck .
I had this Y61 patrol towed in . owner said vehicle just died on her .
Anyway attached the consult2 diagnose machine on to it .
DTC result was
Accel position sensor 3
CKP sensor/circuit 17
I replaced both sensors but the engine is running very rough then dying and couldnt start.
It didnt overheat or anything.
couldnt do a compression test as i havent got a dummy glow plug, couldnt modify one either as i dont carry spares and so i have to find out where i can purchase one online. from brisbane will be the closest for me .
Anyway guys , any help at all, will be most appreciated.