gday boys and girls

[albi]

:cheers: well hello ,what patrol do i own ??? well i dont !! dont like them never will !! sorry being honest :redface:

but i do have "well the handbrake has an r50 pathy yuk lol"
so why am i here you ask ?????

and im hopeing that with ol aussie ,help a bloke out attitude, i might be able to help my customer out.

i have an y61 patrol in the shop rd28 turbo, we have a new donk to go in,exh inj pump,new turbo,t-belt kit the lot,useing 5 x different manuels "and they all say the same thing, carry out t-belt fittment as follows
1- set crank to BDC keyway to "6 oclock and scribe mark to 3 oclock"
2-cam mark to t-cover
3-inj pump mark on sprocket to t-cover"and making sure the "9"is at same mark
3-fit belt "hmmm im likeing this "
4-inj pump mark to cam mark is " 25 teeth"
5-cam mark to crank scribe mark is " 51 teeth"
all good so far as per manuals !!!!!

6:beer::beer::beer: hmmm some these might help

7-attempt to wind over , i can only get 40 - 60 deg clockwise and then bang it hits the valve ?? wtf!

8-we removed the cam to wind over bottom end to rule out fouling ,all good winds over.
9-re-fit cam try to retard crank timming by one tooth ? no good wont even wind backwards piston hits valves
10- advance crank timming 1 tooth ,still hits
11- advanace it 2 teeth and it will spin ok ,but now keyway is at "8 oclock" not at the 6 oclock as shown in manuals???
but ??? directly below the crank angle angle sensor is an flat marker "imagine a 30mm flat alloy bar protruding approx 40mm out of t-case with a grove all along the end " looks a lot like a timming mark but no book,manual or nissan bloke can tell me what that marker is ??:furious:

12-now ,called engine supplyer and told it should be good at those marks and that he gets plenty o calls of t-belt align issues.
and after speaking to the techs at the machine shop they work out how they went wrong.
the lifters are solids with buckets and shims so the lifters arnt hydroliced up !!
13- the cam is the same as the old one.

:bowdown::bowdown::bowdown::bowdown::bowdown::bowd own::bowdown::bowdown::bowdown:
so please i beg of you ,has anyone had this happen ?? and do you know wat the flat alloy bar is ??

im a landie freak,so i should be able to work this out ,but it has me stumped

[albi]

here is a sample of the t-belt marks
http://www.justanswer.com/uk-nissan/21ojq-nissan-rd-28-cam-belt-timing.html

[growler2058]

im a landie freak, it has me stumped

Youll get over it hahahahahahahaha welcome aboard mate someone should be able to give ya some advice

[albi]

bwahahahah mate cool , i dont want to get over it mate
i want the patrol out and in my customers hot hands

[Bigrig]

Sounds like one for Paul, Tony and crew ...

Over to you lads!

[nowoolies]

bout time you got a PATROL hahahahahahahah
then you will be a happy bloke

[Dhuck]

Welcome to the forum bloke. When you have converted you may become a mate. But there are plenty knowledgeable people here that can help you out. Please enjoy our land of knowledge and lack of wealth. lol

[nowoolies]

Welcome to the forum bloke. When you have converted you may become a mate. But there are plenty knowledgeable people here that can help you out. Please enjoy our land of knowledge and lack of wealth. lol

x .....2......

[timbar]

Let me start by saying welcome to the forum Mate

But the truth be knowen until you repent and accept your mistakes by owning a La...La...La.....nd n rolova the Nissan will hate you !!! Hahahaha

But on the other hand you may get lucky and someone will come along with better knowldge than me and help you out !!Hahahaha

Again Welcome Aboard

[macca]

G'day Ken
Welcome Landy owner, looking forward to photos from your Landy in those unfortunate locations that you poor ownwers find yourselves in :animierte-smilies-f
I nearly bought a series 1 when I was 18 but my Dad wouldn't lend me the 100 bucks I was short, ended up with a '42 Wilys instead.
Still wish I got the Landy as well.
Hope you sort out the Nissan Q's you have as there are really switched on people on this forum.
Good luck and best wishes, only kidding about the reliability, prefer to see some of your track photos
Macca

[Maxhead]

Let me start by saying welcome to the forum Mate

But the truth be knowen until you repent and accept your mistakes by owning a La...La...La.....nd n rolova the Nissan will hate you !!! Hahahaha



You must now drink 20 bloody Marys, 20 shots of the spirit of god followed by 20 saintly pure blonds. You must then purchase a Patrol to get your answers....LOL
Welcome to the forum mate....as you can see we don't dribble much..Hahahaha

[kristjanb]

Welcome mate...

[Finly Owner]

That's just Patrol/Mav carma bitiing you in ass Albi. Put crap on them and they give you the craps!


Tim

[MudRunnerTD]

G'day Albi, sorry mate not getting the answers your chasing today, There is another bloke here today looking for almost the same answers on a RD28. The guy your after is YNOT, he a Moderator here but has not been on today, he will sort it our for you mate for sure, Another Moderator Patch may have an answer for you too but he has not been on today either.

Your best bet to be honest is to start your Question in a New thread with the right title and your answers will come mate, Your question has been lost in your introduction mate.

Here you go mate i started a thread for you and hopefully you get an answer.

http://www.nissanpatrol.com.au/forums/showthread.php?6640-Big-Problems-with-an-RD28-Need-advice-Please&p=152791#post152791

Cheers MR

[Clunk]

G'day Albi, sorry mate not getting the answers your chasing today, There is another bloke here today looking for almost the same answers on a RD28. The guy your after is YNOT, he a Moderator here but has not been on today, he will sort it our for you mate for sure, Another Moderator Patch may have an answer for you too but he has not been on today either.

Your best bet to be honest is to start your Question in a New thread with the right title and your answers will come mate, Your question has been lost in your introduction mate.

Here you go mate i started a thread for you and hopefully you get an answer.

http://www.nissanpatrol.com.au/forums/showthread.php?6640-Big-Problems-with-an-RD28-Need-advice-Please&p=152791#post152791

Cheers MR

good on ya MR for adding a new thread................................. apologies Albi but the usual experts seem to be MIA at the mo, please be patient and hopefully someone will get an answer for you soon....

PS.....welcome aboard mate... what sort of landy do you drive????

[wildgu6]

G'day buddy,
Great bunch around here mate, great advice, heaps of knowledge & experience and some great laughs too,
If you dont find the answers your after here, maybe they dont like what your drivin....lol
Nah seriously the gurus should be able toset you straight, and help your Qs

Welcome aboard buddy.Enjoy the ride

Cheers Pete

[albi]

good on ya MR for adding a new thread................................. apologies Albi but the usual experts seem to be MIA at the mo, please be patient and hopefully someone will get an answer for you soon....

PS.....welcome aboard mate... what sort of landy do you drive????
well to be hounest mate i dont drive one !! had a 2 door classic that had the lot but 4wd's just dont do it for me no more, so to speak !!
to make a landie bullet proof you need a lot of mula!!
and id rather spend it on a TL1000s streetfightered suzuki!!

lolol besides i work for a landie specalist that does nissan and tojo and having access to the dissmantling yard is giving me way to many ideas lolol
like a 4 door vouge
gu diffs
td5 donk
get ma drift :bigthumbup:
any way thanks for tha welcome

[albi]

G'day Ken
Welcome Landy owner, looking forward to photos from your Landy in those unfortunate locations that you poor ownwers find yourselves in :animierte-smilies-f
I nearly bought a series 1 when I was 18 but my Dad wouldn't lend me the 100 bucks I was short, ended up with a '42 Wilys instead.
Still wish I got the Landy as well.
Hope you sort out the Nissan Q's you have as there are really switched on people on this forum.
Good luck and best wishes, only kidding about the reliability, prefer to see some of your track photos
Macca

hi mate cheers i posted some pics of my rangie in my album but am running out of time to upload here otherwise they are in my album mate