PDA

View Full Version : 2.8 top end noise



aaron
10th October 2011, 08:12 AM
Hi the top end of my 2.8 has started to make more noise then befor sounds like tappits was wondering if there has been problems with the 2.8 before----- thinking its the shims or a hydrolic lifter shiz it self not to shor tho soon as i start it loud metlish noise cold and hot. rattel the worst when driving and i back off the throtel it goes realy rattely

Bigrig
10th October 2011, 08:22 AM
Hi the top end of my 2.8 has started to make more noise then befor sounds like tappits was wondering if there has been problems with the 2.8 before----- thinking its the shims or a hydrolic lifter shiz it self not to shor tho soon as i start it loud metlish noise cold and hot. rattel the worst when driving and i back off the throtel it goes realy rattely

Have you checked the oil level? Remote, but could be low and hence the rattle ...

aaron
10th October 2011, 08:25 AM
nar it good man it nice and full......

the ferret
10th October 2011, 09:16 AM
nar it good man it nice and full......

How long since the timing belt was done?, it may be the tensioner or idler is flogged.
I would check it out ASAP. It could even be a "dribbleing" injector.
Does it blow white smoke on start up?
Cheers, the ferret.

aaron
10th October 2011, 07:46 PM
timing belt kit done 1500km ago - no white smoak on start up all good there - think it has to be shims- tappets or a stufft lifter ?

the ferret
10th October 2011, 08:19 PM
It won't be a lifter fer sure, the RD 2.8 has none.
maybe a broken valve spring or an exhaust or boost leak.

aaron
11th October 2011, 09:57 PM
mmm ok it going in to nissan tomorow to get looked at hope it dont cost me left nut to fix-----