front washer pump

[Matt07]

hey,
the other day my front washer pump just stoped. so i got a new one and it still doesn't work. when i pull the stalk i cant hear the motor go. the back one works fine... ive check the lines and there not blocked any advice would be great
cheers

[patch697]

hey,
the other day my front washer pump just stoped. so i got a new one and it still doesn't work. when i pull the stalk i cant hear the motor go. the back one works fine... ive check the lines and there not blocked any advice would be great
cheers

Have you checked your fuses?

[Yendor]

Is this on a GU?, if so then.

With the ignition on you should have power in the blue wire at the washer pump, the earth to the pump is supplied by the washer switch/stalk via the Blue with a yellow trace wire.

If you have power in the Blue wire you will need to check continuity in the Blue with Yellow stripe wire between the pump and switch/stalk.

If you short the Blue with Yellow stripe wire to ground the pump should work (if the pump is ok) ignition needs to be on.

Just checking, you did replace the front washer pump? and not the rear one by mistake.

[Matt07]

is there a fuse just for the washer pump?? cause i cant find it i only can find the wiper one

[Yendor]

No separate fuse, runs off the same fuse as the front wipers.