quick dawes valve question

[WORTHOS6]

hi guys quickie on all the guys that have fitted boost gauge/ dawes valve
did everyone have to tap the fitting into the boost line or is there another way

[big_fletch]

I tapped my dawes valve into my boost line with a tee fitting, works like a charm

Fletcha

[YNOT]

I had a fitting brazed onto the pipe between the outlet of the intercooler and the inlet manifold.
There is no factory point you can use.

Tony

[WORTHOS6]

thanks again guys
i see on chaz/s web site tha he tapped into the boost line going into intercooler
is this how you did it big flech

some pics would be great guys
again thanks for ther feed back

i have had the needle valve & dawes valve for a while now and was a bit cunfused on what line to use
i have also posted some pics in regards to my solinoid valve on what to use as i have allready a loop

i have to wait for my back to stop being sore after being hit from behind by a bloody landcruser
rig is only 12 months old & fancy being rear ended by a cruser

anyway when all done i will post some pics

[big_fletch]

No worries, I will take some pics of where I have tapped into and post them up tonight for ya mate

Fletcha

[WORTHOS6]

your a legend mate

thanks heaps

[YNOT]

http://i758.photobucket.com/albums/xx224/tonyh01/P1010094Small.jpg

You can see where mine is fitted here, with the brass T-piece screwed in to it.

Tony

[big_fletch]

You beat me to it tony Haha, mine is exactly the same as above

Fletcha

[WORTHOS6]

thanks again guys is this on the outlet side of the intercooler

[WORTHOS6]

sorry i read the post this time
got it