PDA

View Full Version : Newbie



petergu
18th August 2011, 11:57 AM
Hi I am new to this site I have a 2003 3ltr gu 159000 ks have had it lifted 2inch air bag assit in rear springs , long range main & spare tanks , chipped , bull bar etc . At the moment it is in the workshop getting the front end done pulls to the left bad wheel shake at 85-90 kph they have said the alinment was back to front eg right wheel was the angle that left shouid have been and left was at the right side angle they are going to fit something called a shimer this will change the chamber on each side they have also repacked the front bearings and renewd the seals this will cost heaps but I should have a nice car again
sorry to rabbit on petergu

Bob
18th August 2011, 12:07 PM
Welcome Peter. Join in and enjoy

DX grunt
18th August 2011, 12:08 PM
Welcome Peter

Great to have you onboard.

Where are you from?

Take care out there.

Rossco

AB
18th August 2011, 12:11 PM
Welcome to the forum Peter, feel free to ask any questions and join in the conversations.

Bigrig
18th August 2011, 01:05 PM
G'day mate - Welcome aboard. Great people, information and laughs to be found on the forum, so don't be shy and join to make the most of it. Enjoy!

growler2058
18th August 2011, 01:31 PM
Gday Peter welcome aboard mate theyre a good mob here full of great info and advice

MudRunnerTD
18th August 2011, 06:14 PM
Hey Pete

Welcome to the forum mate

There is a bit about on the Camber Correction kist and there are a couple of variations.

I have a "SAFE-T-STEER" King Pin camber adjuster fitted to mine and very happy with it. Google it and you will get good info on it

Good luck and enjoy the forum mate.

cheers MR

katwoman
18th August 2011, 06:17 PM
Welcome, mate. Always great to have more GU's amongst us.

Woof
18th August 2011, 06:57 PM
Welcome to the forum Peter, enjoy mate

Dhuck
18th August 2011, 07:47 PM
Welcome to the forum mate

Clunk
18th August 2011, 08:33 PM
G'day mate and welcome aboard

Crappa Tappa Time

Finly Owner
18th August 2011, 09:25 PM
Hi and welcome to Nissans Nut House Peter



Tim

maphew
18th August 2011, 10:01 PM
Welcome, everyone is super friendly and helpful. Great place for a chat or some information.

Maxhead
18th August 2011, 10:07 PM
G'Day Peter, welcome to the forum mate

snicko
18th August 2011, 10:14 PM
Welcome to the forum mate. Lots of good info and friendly people - Enjoy

petergu
19th August 2011, 04:58 AM
Thankyou all for the welcome I am from Adelaide the work has been finnished the car is like brand new thankyou to alltrac 4x4

growler2058
19th August 2011, 05:25 AM
Hey Peter we have a national forum
meetup at Loveday 4wd park Easter next year good if you could make it mate

mcjah
19th August 2011, 10:36 AM
Newbie here to mate, look forward to chatting to you more in the forum

cheers

James

timbar
21st August 2011, 01:50 AM
G'day Mate - Welcome aboard join in when you are ready and have fun mate plenty to do see and if u have any problems just ask and im sure u will get an answer !! Bucket loads of usefull information here plenty to read so join in meet the great bunch of guys and girls on our wonderful forum !!

You will not be disapointed !!


ENJOY and WELCOME


Tim

Sir Roofy
21st August 2011, 08:34 AM
welcome aboard mate enjoy your stay

Sir Roofy
21st August 2011, 08:35 AM
welcome aboard mate