GQ hubs to Hulk hubs

[Mr T]

Hi All, my standard GQ hubs are well shagged so I bought some Hulk ones. Just needs some help as they are different designs. I'm guessing I no longer need the egg ring, bushing & drive clutch. Also if I don't need them does the snap ring move down to the next groove on the splined shaft as I tried this and there's about 4mm play? Any help would be great cheers.

[PeeBee]

Hi All, my standard GQ hubs are well shagged so I bought some Hulk ones. Just needs some help as they are different designs. I'm guessing I no longer need the egg ring, bushing & drive clutch. Also if I don't need them does the snap ring move down to the next groove on the splined shaft as I tried this and there's about 4mm play? Any help would be great cheers.

Have you contacted the supplier? This would be a first step I think.

[mihit]

I would need pictures before I could even guess.
4mm end float seems excessive...I vaguely remember installing something somewhere that required custom shims to set end float. Stuffed if I remember what though.