PDA

View Full Version : GQ Patrol Brake line part - WTB


PeeBee
27th April 2023, 12:03 PM
I am looking for the brake line distribution block that sits on the chassis on drivers side chassis rail, next to the spring tower, it has 5 lines going into it. Does anyone have one lying around they want to sell? I have contacted PAP and Hall4x4 and they dont have any in stock. , and a couple of Facebook contacts with GQ wrecking etc have failed to respond. Needs to be from a LWB, and preferably a late model just in case there is any quirty BS with the threads - which there shouldn't be.
mudski
27th April 2023, 04:49 PM
Is this the part Phil?
86741
PeeBee
27th April 2023, 05:29 PM
Is this the part Phil?
86741

That is the baby, where did you find that? Is it for sale and how much do you want for it?
PeeBee
27th April 2023, 05:31 PM
Sorry its from Patrol UQ, bit visually overloaded right at this moment - I can order from them direct I guess.

thanks Mark, big big help.
mudski
27th April 2023, 06:14 PM
Sorry its from Patrol UQ, bit visually overloaded right at this moment - I can order from them direct I guess.

thanks Mark, big big help.

You can order direct from Partsouq but I do believe this part is no longer available. Maybe contact a Nissan dealer and get them to check. They should be able to check within all dealers in AU.


Sent from my iPhone using Tapatalk
mihit
28th April 2023, 02:12 PM
I do believe this part is no longer available.

If all else fails it looks as though it could be knocked together pretty quick by any engineering shop.
PeeBee
2nd May 2023, 06:12 PM
You can order direct from Partsouq but I do believe this part is no longer available. Maybe contact a Nissan dealer and get them to check. They should be able to check within all dealers in AU.


Sent from my iPhone using Tapatalk

Thanks I have contacted PAP and they are waiting for a GQ LWB to come in this week, plus there is a nissan Wrecker in Bayswater who may be able to help, not Hall4x4 this time, and there is a guy in Pakenham who may have one, but wont post it.
PeeBee
3rd May 2023, 03:03 PM
Patrol A Part have one on a vehicle now, coming off this arvo for tomorrow pickup. No stock anywhere apart from the other guy in Pakenham. Low profile double flare tool arrived yesterday, so with luck will get onto this tomorrow or thursday.
BrazilianY60
4th May 2023, 12:20 AM
PeeBee, when you go to PAP to pick your part, do you mind checking if they have a full set of USED GU4 fender flares / over-fenders and how much is it worth? It can be any color, even made of different color parts to make it a full set...
PeeBee
4th May 2023, 08:42 AM
PeeBee, when you go to PAP to pick your part, do you mind checking if they have a full set of USED GU4 fender flares / over-fenders and how much is it worth? It can be any color, even made of different color parts to make it a full set...

Sure, will do. They are very responsive to emails also as I have found out, sending photos of what they have as well, however I will be there this morning and will ask.
PeeBee
4th May 2023, 11:21 AM
PeeBee, when you go to PAP to pick your part, do you mind checking if they have a full set of USED GU4 fender flares / over-fenders and how much is it worth? It can be any color, even made of different color parts to make it a full set...

OK, I walked into PAP to pick up my part and asked about your flares and another guy said he had an email from you and was responding, BUT just in case it wasnt you, $640 for the 8 units.
BrazilianY60
4th May 2023, 12:41 PM
Thank you PeeBee! Yes, it was me! I took the courage to send them an email after you said they were good to talk. AUD 640 sounds too expensive for the market over there? I mean, what do you think a wrecker would ask for something like this?

BTW, sorry for hijacking the brake topic!
PeeBee
4th May 2023, 12:54 PM
Thank you PeeBee! Yes, it was me! I took the courage to send them an email after you said they were good to talk. AUD 640 sounds too expensive for the market over there? I mean, what do you think a wrecker would ask for something like this?

BTW, sorry for hijacking the brake topic!

Look they are both a wrecker and new parts supplier. I think the price would be comparable to others - the issue I guess with any trim, they are easy to break and expensive direct from Nissan as a genuine spare part. The only other route is to scour our local market places, such as GUMTREE and if you find something, make contact and work out a deal. If its in Victoria Australia I am sure one of the group here could help expediting the goods to you, but just factor in the freight as that could be a killer, especially as it would need to be in a rigid crate I guess.